Suchergebnisse

Cyanothece sp. ATCC 51142 is considered a microorganism with the potential to generate sustainable hydrogen in the future. However, few kinetic models are capable of simulating different phases of Cyanothece sp. ATCC 51142 from growth to hydrogen production. In the present study four models are constructed to simulate Cyanothece sp. batch photoproduction process. A dynamic optimisation method is used to determine parameters in the models. It is found that although the piecewise models fit experimental data better, large deviation can be induced when they are used to simulate a process whose operating conditions are different from the current experiments. The modified models are eventually selected in the present study to simulate a two-stage continuous photoproduction process. The current simulation results show that a plug flow reactor (PFR) shows worse performance compared to a continuous stirred-tank reactor (CSTR) in the current operating conditions since it lowers the total hydrogen production. The finding is that nitrate and oxygen concentration change along the direction of culture movement in PFR, and hydrogen is only generated in the zone where both of them are low. The reactor area thereby is not well utilised. Additionally, as hydrogen production rate is primarily influenced by biomass concentration, which increases initially and decreases eventually along the direction of culture movement, the overall hydrogen production rate in a PFR may be lower than that in a CSTR. Finally, in this study fed-batch photoproduction processes are proposed containing only one photobioreactor based on the current simulation. ; Solar Hydrogen Project was funded by the UK Engineering and Physical Sciences Research Council (EPSRC), Project reference EP/F00270X/1. The author E.A. del Rio-Chanona funding by CONACyT Scholarship No. 522530 scholarship from the Secretariat of Public Education and the Mexican government. ; This is the final published version. It first appeared at http://www.sciencedirect.com/science/article/pii/S0009250915000883#.

This research explores the photofermentation of glycerol to hydrogen by Rhodopseudomonas palus- tris, with the objective to maximise hydrogen production. Two piecewise models are designed to simulate the entire growth phase of R. palustris; a challenge that few dynamic models can accomplish. The parameters in both models were fitted by the present batch experiments through the solution of the underlying optimal control problems by means of stable and accurate discretisation techniques. It was found that an initial glutamate to glycerol ratio of 0.25 was optimal, and was independent of the initial biomass concentration. The glycerol conversion efficiency was found to depend on initial biomass concentration and its computational peak is 64.4%. By optimising a 30-day industrially relevant batch process, the hydrogen productivity was improved to be 37.7 mL·g biomass-1·hr-1 and the glycerol conversion efficiency was maintained at 58%. The models can then be applied as the connection to transfer biohydrogen production from laboratory scale into industrial scale. ; Authors N. Xiao and Dr. K. T. Mahbubani are funded through the KACST-Cambridge Center for Advanced Material Manufacture, the author E. A. del Rio-Chanona is found by CONACyT scholarship No. 522530 from the Secretariat of Public Education and the Mexican government. ; This is the accepted manuscript. The final version is available from Elsevier at http://www.sciencedirect.com/science/article/pii/S0009250915001815.

Dynamic simulation is a valuable tool to assist the scale-up and transition of biofuel production from laboratory scale to potential industrial implementation. In the present study two dynamic models are constructed, based on the Aiba equation, the improved Lambert–Beer's law and the Arrhenius equation. The aims are to simulate the effects of incident light intensity, light attenuation and temperature upon the photo-autotrophic growth and the hydrogen production of the nitrogen-fixing cyanobacterium Cyanothece sp. ATCC 51142. The results are based on experimental data derived from an experimental setup using two different geometries of laboratory scale photobioreactors: tubular and flat-plate. All of the model parameters are determined by an advanced parameter estimation methodology and subsequently verified by sensitivity analysis. The optimal temperature and light intensity facilitating biohydrogen production in the absence of light attenuation have been determined computationally to be 34 °C and 247 μmol m− 2 s− 1, respectively, whereas for cyanobacterial biomass production they are 37 °C and 261 μmol m− 2 s− 1, respectively. Biomass concentration higher than 0.8 g L− 1 is also demonstrated to significantly enhance the light attenuation effect, which in turn inducing photolimitation phenomena. At a higher biomass concentration (3.5 g L− 1), cyanobacteria are unable to activate photosynthesis to maintain their lives in a photo-autotrophic growth culture, and biohydrogen production is significantly inhibited due to the severe light attenuation. ; The author D. Zhang gratefully acknowledges the support from his family. The author P. Dechatiwongse is supported by a scholarship from the Royal Thai Government, Thailand, and his project, Solar Hydrogen Project, was funded by the UK Engineering and Physical Sciences Research Council (EPSRC), project reference EP/F00270X/1. Author E. A. del Rio-Chanona is funded by CONACyT scholarship No. 522530 from the Secretariat of Public Education and the Mexican government. The authors wish to thank Mr. Fabio Fiorelli for his invaluable advice and support during the preparation of this work. ; This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.algal.2015.03.015