Suchergebnisse

This paper proposes a methodology to evaluate the pavement surface distress for maintenance planning of road pavement using 3D point clouds from Mobile Mapping System (MMS). The issue on maintenance planning of road pavement requires scheduled rehabilitation activities for damaged pavement sections to keep high level of services. The importance of this performance-based infrastructure asset management on actual inspection data is globally recognized. Inspection methodology of road pavement surface, a semi-automatic measurement system utilizing inspection vehicles for measuring surface deterioration indexes, such as cracking, rutting and IRI, have already been introduced and capable of continuously archiving the pavement performance data. However, any scheduled inspection using automatic measurement vehicle needs much cost according to the instruments' specification or inspection interval. Therefore, implementation of road maintenance work, especially for the local government, is difficult considering costeffectiveness. Based on this background, in this research, the methodologies for a simplified evaluation for pavement surface and assessment of damaged pavement section are proposed using 3D point clouds data to build urban 3D modelling. The simplified evaluation results of road surface were able to provide useful information for road administrator to find out the pavement section for a detailed examination and for an immediate repair work. In particular, the regularity of enumeration of 3D point clouds was evaluated using Chow-test and F-test model by extracting the section where the structural change of a coordinate value was remarkably achieved. Finally, the validity of the current methodology was investigated by conducting a case study dealing with the actual inspection data of the local roads.

This paper proposes a methodology to evaluate the pavement surface distress for maintenance planning of road pavement using 3D point clouds from Mobile Mapping System (MMS). The issue on maintenance planning of road pavement requires scheduled rehabilitation activities for damaged pavement sections to keep high level of services. The importance of this performance-based infrastructure asset management on actual inspection data is globally recognized. Inspection methodology of road pavement surface, a semi-automatic measurement system utilizing inspection vehicles for measuring surface deterioration indexes, such as cracking, rutting and IRI, have already been introduced and capable of continuously archiving the pavement performance data. However, any scheduled inspection using automatic measurement vehicle needs much cost according to the instruments' specification or inspection interval. Therefore, implementation of road maintenance work, especially for the local government, is difficult considering costeffectiveness. Based on this background, in this research, the methodologies for a simplified evaluation for pavement surface and assessment of damaged pavement section are proposed using 3D point clouds data to build urban 3D modelling. The simplified evaluation results of road surface were able to provide useful information for road administrator to find out the pavement section for a detailed examination and for an immediate repair work. In particular, the regularity of enumeration of 3D point clouds was evaluated using Chow-test and F-test model by extracting the section where the structural change of a coordinate value was remarkably achieved. Finally, the validity of the current methodology was investigated by conducting a case study dealing with the actual inspection data of the local roads.

This review paper examines the structure of the EU aquaculture sector, the contribution it makes to the EU economy and the policy environment for past and future development. The primary analysis uses statistical data from the Food and Agriculture Organization of the United Nations which has been re-categorized according to species groups established by the European Aquaculture Technology and Innovation Platform (EATiP) and by culture system type using expert knowledge. Additional data sources for the analysis include the European Market Observatory for Fisheries and Aquaculture Products (EUMOFA) and the European Commission Scientific, Technical and Economic Committee for Fisheries. EU aquaculture production was 1.34 million tonnes in 2012 with a first sale value of a,not sign4.76 billion. Shellfish comprised 45 % by volume and 28 % by value; marine fish 30 % by volume and 53 % by value; and freshwater fish 25 % by volume and 19 % by value. The total production volume has actually fallen slightly from 1.4 million tonnes in 2000, whilst the value has increased significantly from 2.79 billion in 2000, mainly due to a growth in Atlantic salmon production. Five countries accounted for around 78 % of the direct output value of EU aquaculture in 2012, the UK, France, Greece, Italy and Spain. Around 50 % of the direct output value was generated using marine cage systems (28 % by volume), whilst less than 3 % of value was generated in recirculated aquaculture systems (< 1.5 % by volume). Around 5 % of value was contributed by extensive to semi-intensive inland and coastal pond systems. STECF (2014) estimates there are between 14,000 and 15,000 aquaculture enterprises in the EU employing around 80,000 people, approximately 40,000 full-time equivalent (FTE). The greatest number of jobs (FTE) is provided by the freshwater pond and suspended shellfish sectors due to much lower productivity figures. This could be seen as a social benefit in rural and coastal regions, but corresponding low wages could also discourage young entrants to the industry and lead to dependency on migrant workers. Where efficiencies can be improved through capital investment there is likely to be significant scope for consolidation of ownership as can be observed in the marine fish sector. The output from aquaculture has to find a place within the wider fish and seafood market where volumes are generally inversely related to price. The potential growth of the sector is therefore constrained both in relation to the overall market and with respect to competition from substitute products. These include product from EU capture fisheries as well as imports from third countries (sourced from aquaculture and capture fisheries). Whilst interactions between individual products can be hard to demonstrate, any increase in production costs is likely to lead to lower output volumes, whilst improvements in production efficiency can lead to increased output volumes. With around 60 % of EU fish and seafood supply obtained through imports, and little prospect of increasing outputs from capture fisheries, EU policy is generally supportive of sustainable aquaculture development for reasons of food security and economic development. The underlying basis for this is maximizing the quality and health benefits of farmed products, whilst improving resource efficiency and minimizing impacts. This is expressed through funding support for research and technological development and structural funds to the fisheries and aquaculture industries. However, constraints to growth also exist in the form of regulatory barriers and costs that reduce industry competitiveness. Changing market requirements are also a factor. Prospects for growth have been assessed using the results of EATiP stakeholder workshops combined with the analysis of the sector by system type. These suggest an overall increase in production by 55 % is possible by 2030 based mainly on expansion of marine cage-based farming using larger systems in more exposed sites and similarly shellfish farming using larger-scale suspended systems. Expansion of recirculated aquaculture systems appears likely based on entrepreneurial and European policy for research and technological development activity, although constrained by currently low competitiveness.

The urban environments of megacities worldwide are in urgent need of sustainble management. Hazardous substances, atmospheric movement, coastal hydrology, biological tests, and wasterwater are among the topics addressed by leading researchers today. Based on case studies of several Asian cities and their environmental issues, this book focuses on advanced monitiring and simulation systems essential to the development of strategies of sustainability. Monotoring and modeling are fundamnetal to understanding pollution phenomena and the critical mechanisms of pollution control processes. While environmental monitoring provides information that characterizes environment quality, simulations apply such data to the development of models of the kinetics involved. This volume will be practical interest to students and young professionals in the field of civil engineering, architecture, environmental engineering, and environmental science, as well as those without knowledge or experience in computer science. Invaluable information is also provided for city planners and government policy makers. --Book Jacket

Department of Energy (United States of America) ; National Science Foundation (United States of America) ; Australian Research Council (Australia) ; National Council for the Development of Science and Technology ; Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ) ; Natural Sciences and Engineering Research Council (Canada) ; Chinese Academy of Sciences ; National Natural Science Foundation of China (China) ; Administrative Department of Science, Technology and Innovation (Colombia) ; Ministry of Education, Youth and Sports (Czech Republic) ; Academy of Finland (Finland) ; Alternative Energies and Atomic Energy Commission ; National Center for Scientific Research/National Institute of Nuclear and Particle Physics (France) ; Bundesministerium fur Bildung und Forschung (Federal Ministry of Education and Research) ; Deutsche Forschungsgemeinschaft (German Research Foundation) (Germany) ; Department of Atomic Energy (India) ; Department of Science and Technology (India) ; Science Foundation Ireland (Ireland) ; Istituto Nazionale di Fisica Nucleare (National Institute for Nuclear Physics) (Italy) ; Ministry of Education, Culture, Sports, Science and Technology (Japan) ; Korean World Class University Program ; National Research Foundation (Korea) ; National Council of Science and Technology (Mexico) ; Foundation for Fundamental Research on Matter (The Netherlands) ; National Science Council (Republic of China) ; Ministry of Education and Science of the Russian Federation ; National Research Center Kurchatov Institute of the Russian Federation ; Russian Foundation for Basic Research (Russia) ; Slovak R&D Agency (Slovakia) ; Ministry of Science and Innovation ; Consolider-Ingenio Program (Spain) ; Swedish Research Council (Sweden) ; Swiss National Science Foundation (Switzerland) ; Ministry of Education and Science of Ukraine (Ukraine) ; Science and Technology Facilities Council ; Royal Society (United Kingdom) ; A. P. Sloan Foundation (United States of America) ; European Union community Marie Curie Fellowship ; European Union community Marie Curie Fellowship: 302103 ; Drell-Yan lepton pairs produced in the process p (p) over bar -> l(+)l(-) + X through an intermediate gamma*/Z boson have an asymmetry in their angular distribution related to the spontaneous symmetry breaking of the electroweak force and the associated mixing of its neutral gauge bosons. The CDF and D0 experiments have measured the effective-leptonic electroweak mixing parameter sin(2) theta(lept)(eff) using electron and muon pairs selected from the full Tevatron proton-antiproton data sets collected in 2001-2011, corresponding to 9-10 fb(-1) of integrated luminosity. The combination of these measurements yields the most precise result from hadron colliders, sin(2)theta(lept)(eff) = 0.23148 +/- 0.00033. This result is consistent with, and approaches in precision, the best measurements from electron-positron colliders. The standard model inference of the on-shell electroweak mixing parameter sin(2) theta(W), or equivalently the W-boson mass M-W, using the ZFITTER software package yields sin(2) theta(W) = 0.22324 +/- 0.00033 or equivalently, M-W = 80.367 +/- 0.017 GeV/c(2).

Department of Energy ; National Science Foundation (U.S.A.) ; Australian Research Council (Australia) ; National Council for the Development of Science and Technology ; Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ) ; European Union community Marie Curie Fellowship Contract ; European Union community Marie Curie Fellowship Contract: 302103 ; : DE-AC02-07CH11359 ; The CDF and D0 experiments at the Fermilab Tevatron have measured the asymmetry between yields of forward- and backward-produced top and antitop quarks based on their rapidity difference and the asymmetry between their decay leptons. These measurements use the full data sets collected in proton-antiproton collisions at a center-of-mass energy of root s = 1.96 TeV. We report the results of combinations of the inclusive asymmetries and their differential dependencies on relevant kinematic quantities. The combined inclusive asymmetry is A(FB)(t (t) over bar) = 0.128 +/- 0.025. The combined inclusive and differential asymmetries are consistent with recent standard model predictions.