Suchergebnisse

[Background] Microbial fuel cells (MFCs) operating with complex microbial communities have been extensively reported in the past, and are commonly used in applications such as wastewater treatment, bioremediation or in-situ powering of environmental sensors. However, our knowledge on how the composition of the microbial community and the different types of electron transfer to the anode affect the performance of these bioelectrochemical systems is far from complete. To fill this gap of knowledge, we designed a set of three MFCs with different constrains limiting direct and mediated electron transfer to the anode. ; [Results] The results obtained indicate that MFCs with a naked anode on which a biofilm was allowed unrestricted development (MFC-A) had the most diverse archaeal and bacterial community, and offered the best performance. In this MFC both, direct and mediated electron transfer, occurred simultaneously, but direct electron transfer was the predominant mechanism. Microbial fuel cells in which the anode was enclosed in a dialysis membrane and biofilm was not allowed to develop (MFC-D), had a much lower power output (about 60% lower), and a prevalence of dissolved redox species that acted as putative electron shuttles. In the anolyte of this MFC, Arcobacter and Methanosaeta were the prevalent bacteria and archaea respectively. In the third MFC, in which the anode had been covered by a cation selective nafion membrane (MFC-N), power output decreased a further 5% (95% less than MFC-A). In this MFC, conventional organic electron shuttles could not operate and the low power output obtained was presumably attributed to fermentation end-products produced by some of the organisms present in the anolyte, probably Pseudomonas or Methanosaeta. ; [Conclusion] Electron transfer mechanisms have an impact on the development of different microbial communities and in turn on MFC performance. Although a stable current was achieved in all cases, direct electron transfer MFC showed the best performance concluding that biofilms are the major contributors to current production in MFCs. Characterization of the complex microbial assemblages in these systems may help us to unveil new electrogenic microorganisms and improve our understanding on their role to the functioning of MFCs. ; This work was partially funded by projects RTC-2016-5766-2, CTQ2014–54553-C3–2-R and CTQ2014–61809-EXP to JM from the Spanish Government, with participation of the European Regional Development Fund. ; Peer reviewed

[Background] Microbial fuel cells (MFCs) operating with complex microbial communities have been extensively reported in the past, and are commonly used in applications such as wastewater treatment, bioremediation or in-situ powering of environmental sensors. However, our knowledge on how the composition of the microbial community and the different types of electron transfer to the anode affect the performance of these bioelectrochemical systems is far from complete. To fill this gap of knowledge, we designed a set of three MFCs with different constrains limiting direct and mediated electron transfer to the anode. ; [Results] The results obtained indicate that MFCs with a naked anode on which a biofilm was allowed unrestricted development (MFC-A) had the most diverse archaeal and bacterial community, and offered the best performance. In this MFC both, direct and mediated electron transfer, occurred simultaneously, but direct electron transfer was the predominant mechanism. Microbial fuel cells in which the anode was enclosed in a dialysis membrane and biofilm was not allowed to develop (MFC-D), had a much lower power output (about 60% lower), and a prevalence of dissolved redox species that acted as putative electron shuttles. In the anolyte of this MFC, Arcobacter and Methanosaeta were the prevalent bacteria and archaea respectively. In the third MFC, in which the anode had been covered by a cation selective nafion membrane (MFC-N), power output decreased a further 5% (95% less than MFC-A). In this MFC, conventional organic electron shuttles could not operate and the low power output obtained was presumably attributed to fermentation end-products produced by some of the organisms present in the anolyte, probably Pseudomonas or Methanosaeta. ; [Conclusion] Electron transfer mechanisms have an impact on the development of different microbial communities and in turn on MFC performance. Although a stable current was achieved in all cases, direct electron transfer MFC showed the best performance concluding that biofilms are the major contributors to current production in MFCs. Characterization of the complex microbial assemblages in these systems may help us to unveil new electrogenic microorganisms and improve our understanding on their role to the functioning of MFCs. ; This work was partially funded by projects RTC-2016-5766-2, CTQ2014–54553-C3–2-R and CTQ2014–61809-EXP to JM from the Spanish Government, with participation of the European Regional Development Fund. ; Peer reviewed

It is well known that the metabolic activity of some microorganisms results in changes of pH of the culture medium, a phenomenon that can be used for detection and quantification of bacteria. However, conventional glass electrodes that are commonly used for pH measurements are bulky, fragile and expensive, which hinders their application in miniaturized systems and encouraged to the search for alternatives. In this work, two types of metal oxide pH sensors have been tested to detect the metabolic activity of the bacterium Escherichia coli (E. coli). These pH sensors were produced on silicon chips with platinum metal contacts, onto which thin layers of IrOx or Ta2O5 were incorporated by two different methods (electrodeposition and e-beam sputtering, respectively). In order to facilitate measurement in small sample volumes, an Ag/AgCl pseudo-reference was also screen-printed in the chip and was assayed in parallel to an external Ag/AgCl reference electrode. As it is shown, the developed sensors generated results indistinguishable from those provided by a conventional glass pH-electrode but could be operated in significantly smaller sample volumes. After optimization of the detection conditions, the metal oxide sensors are successfully applied for detection of increasing concentrations of viable E. coli, with detection of less than 103 cfu mL−1 in undiluted culture medium in just 5 h. ; Authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (Project CTQ2014-54553-C3-1-R), and from European Union (Project ENIAC-ED-52 v161210). E.B. is supported by the Miguel Servet Program, funded by the Fondo de Investigaciones Sanitarias of the Instituto de Salud Carlos III (Grant CP13/00052) and co-financed by the European Regional Development Fund (ERDF). This work was partially financially supported by Government of Russian Federation, Grant 074-U01. ; Peer reviewed

Legionella pneumophila is responsible for Legionnaires' disease (LD). Its detection in both environmental and clinical samples is mainly performed by culture plate method which requires up to 10 days to obtain results. Nowadays, there are commercial antibodies against this bacterium, but they have not been tested against all subgroups of L. pneumophila sg 1 or serogroups 1–16 or their cross-reactions with other non-Legionella bacteria. Indeed, many of these antibodies became available when only 8 serogroups of L. pneumophila had been described. We tested 7 antibodies and found that 2 (Mab 8/5 and OBT) specifically detected all the subgroups of L. pneumophila sg 1, one without cross-reactions (Mab8/5). Moreover, the LP3IIG2 antibody detected almost all serogroups tested with lower rates of cross-reactivity, resulting in a specific sensitive antibody for the detection of L. pneumophila. LP3IIG2 presented higher rate of cross-reactivity against respiratory non-Legionella isolates, thereby contraindicating its clinical applicability. ; The authors acknowledge the sponsorship by Gas Natural Fenosa and financial support from CIBER and CERCA Programme/Generalitat de Catalunya. N.U. (TECSPR15-1-0046) and O.C (TECSPR14-2-0034) have received funding from the People Programme (Marie Curie Actions) of the 7th Framework Programme of the European Union (FP7/2007–2013), TECNIOspring program from the Agency for Business Competitiveness of the Government of Catalonia (ACCIÓ). ; Peer reviewed