Suchergebnisse

Due to its high adaptability, cassava (Manihot esculenta Crantz) is one of the world's most cultivated and consumed plants after maize and rice. However, there are relatively few scientific studies on this important crop. The objective of this review was therefore to summarize and discuss the available information on cassava cropping in order to promote sustainable practices in terms of production and consumption. Cassava cultivation has been expanding recently at the global scale and is widely consumed in most regions of South America, Africa, and Asia. However, it is also characterized by the presence in its roots of potentially toxic hydrocyanic acid. Furthermore, cassava can also absorb pollutants as it is currently cultivated near roads or factories and generally without consideration for potential sources of soil, water, or atmospheric pollution. Careful washing, peeling, and adequate preparation before eating are therefore crucial steps for reducing human exposure to both environmental pollutants and natural hydrocyanic acid. At present, there is not enough precise data available on this staple food crop. To improve our knowledge on the nutritive benefits versus health risks associated with cassava consumption, further research is necessary to compare cassava cultivars and precisely study the influence of preparation methods.

International audience ; Due to its high adaptability, cassava (Manihot esculenta Crantz) is one of the world's most cultivated andconsumed plants after maize and rice. However, there are relatively few scientific studies on this important crop. The objective of this review was therefore to summarize and discuss the available information on cassava cropping in order to promote sustainable practices in terms of production and consumption. Cassava cultivation has been expanding recently at the global scale and is widely consumed in most regions of South America, Africa, and Asia. However, it is also characterized by the presence in its roots of potentially toxic hydrocyanic acid. Furthermore, cassava can also absorb pollutants as it is currently cultivated near roads or factories and generally without consideration for potential sources of soil, water, or atmospheric pollution. Careful washing, peeling, andadequate preparation before eating are therefore crucial steps for reducing human exposure to both environmental pollutants and natural hydrocyanic acid. At present, there is not enough precise data available on this staple food crop. To improve our knowledge on the nutritive benefits versus health risks associated with cassava consumption, further research is necessary to compare cassava cultivars and precisely study the influence of preparation methods.

International audience ; Due to its high adaptability, cassava (Manihot esculenta Crantz) is one of the world's most cultivated andconsumed plants after maize and rice. However, there are relatively few scientific studies on this important crop. The objective of this review was therefore to summarize and discuss the available information on cassava cropping in order to promote sustainable practices in terms of production and consumption. Cassava cultivation has been expanding recently at the global scale and is widely consumed in most regions of South America, Africa, and Asia. However, it is also characterized by the presence in its roots of potentially toxic hydrocyanic acid. Furthermore, cassava can also absorb pollutants as it is currently cultivated near roads or factories and generally without consideration for potential sources of soil, water, or atmospheric pollution. Careful washing, peeling, andadequate preparation before eating are therefore crucial steps for reducing human exposure to both environmental pollutants and natural hydrocyanic acid. At present, there is not enough precise data available on this staple food crop. To improve our knowledge on the nutritive benefits versus health risks associated with cassava consumption, further research is necessary to compare cassava cultivars and precisely study the influence of preparation methods.

International audience ; Due to its high adaptability, cassava (Manihot esculenta Crantz) is one of the world's most cultivated andconsumed plants after maize and rice. However, there are relatively few scientific studies on this important crop. The objective of this review was therefore to summarize and discuss the available information on cassava cropping in order to promote sustainable practices in terms of production and consumption. Cassava cultivation has been expanding recently at the global scale and is widely consumed in most regions of South America, Africa, and Asia. However, it is also characterized by the presence in its roots of potentially toxic hydrocyanic acid. Furthermore, cassava can also absorb pollutants as it is currently cultivated near roads or factories and generally without consideration for potential sources of soil, water, or atmospheric pollution. Careful washing, peeling, andadequate preparation before eating are therefore crucial steps for reducing human exposure to both environmental pollutants and natural hydrocyanic acid. At present, there is not enough precise data available on this staple food crop. To improve our knowledge on the nutritive benefits versus health risks associated with cassava consumption, further research is necessary to compare cassava cultivars and precisely study the influence of preparation methods.

International audience ; Due to its high adaptability, cassava (Manihot esculenta Crantz) is one of the world's most cultivated andconsumed plants after maize and rice. However, there are relatively few scientific studies on this important crop. The objective of this review was therefore to summarize and discuss the available information on cassava cropping in order to promote sustainable practices in terms of production and consumption. Cassava cultivation has been expanding recently at the global scale and is widely consumed in most regions of South America, Africa, and Asia. However, it is also characterized by the presence in its roots of potentially toxic hydrocyanic acid. Furthermore, cassava can also absorb pollutants as it is currently cultivated near roads or factories and generally without consideration for potential sources of soil, water, or atmospheric pollution. Careful washing, peeling, andadequate preparation before eating are therefore crucial steps for reducing human exposure to both environmental pollutants and natural hydrocyanic acid. At present, there is not enough precise data available on this staple food crop. To improve our knowledge on the nutritive benefits versus health risks associated with cassava consumption, further research is necessary to compare cassava cultivars and precisely study the influence of preparation methods.

International audience ; Due to its high adaptability, cassava (Manihot esculenta Crantz) is one of the world's most cultivated andconsumed plants after maize and rice. However, there are relatively few scientific studies on this important crop. The objective of this review was therefore to summarize and discuss the available information on cassava cropping in order to promote sustainable practices in terms of production and consumption. Cassava cultivation has been expanding recently at the global scale and is widely consumed in most regions of South America, Africa, and Asia. However, it is also characterized by the presence in its roots of potentially toxic hydrocyanic acid. Furthermore, cassava can also absorb pollutants as it is currently cultivated near roads or factories and generally without consideration for potential sources of soil, water, or atmospheric pollution. Careful washing, peeling, andadequate preparation before eating are therefore crucial steps for reducing human exposure to both environmental pollutants and natural hydrocyanic acid. At present, there is not enough precise data available on this staple food crop. To improve our knowledge on the nutritive benefits versus health risks associated with cassava consumption, further research is necessary to compare cassava cultivars and precisely study the influence of preparation methods.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

International audience ; Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m-2·d-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.