Suchergebnisse

The herbicide bromacil has been extensively used in the Spanish Mediterranean region, and although plant protection products containing bromacil have been withdrawn by the European Union, this compound is still frequently detected in surface and ground water of this area. However, the fast and complete disappearance of this compound has been observed in water intended for human consumption, after it has been subjected to chlorination. There is a concern about the possible degradation products formed, since they might be present in drinking water and might be hazardous. In this work, the sensitive full-spectrum acquisition, high resolution and exact mass capabilities of hybrid quadrupole time-of-flight (QTOF) mass spectrometry have allowed the discovery and proposal of structures of transformation products (TPs) of bromacil in water subjected to chlorination. Different ground water samples spiked at 0.5 µg/mL were subjected to the conventional chlorination procedure applied to drinking waters, sampling 2-mL aliquots at different time intervals (1, 10 and 30 min). The corresponding non-spiked water was used as control sample in each experiment. Afterwards, 50 μL of the water was directly injected into an ultra-high-pressure liquid chromatography (UHPLC)/electrospray ionization (ESI)-(Q)TOF system. The QTOF instrument enabled the simultaneous recording of two acquisition functions at different collision energies (MSE approach): the low-energy (LE) function, fixed at 4 eV, and the high-energy (HE) function, with a collision energy ramp from 15 to 40 eV. This approach enables the simultaneous acquisition of both parent (deprotonated and protonated molecules) and fragment ions in a single injection. The low mass errors observed for the deprotonated and protonated molecules (detected in LE function) allowed the assignment of a highly probable molecular formula. Fragment ions and neutral losses were investigated in both LE and HE spectra to elucidate the structures of the TPs found. For those compounds that displayed ...

This study deals with one of the major concerns in mycotoxin determinations: the matrix effect related to LC-MS/MS systems with electrospray ionization sources. To this end, in a first approach, the matrix effect has been evaluated in two ways: monitoring the signal of a compound (added to the mobile phase) during the entire chromatographic run, and by classical post-extraction addition. The study was focused on nine selected mycotoxins: aflatoxin B-1, fumonisins B-1, B-2 and B-3, ochratoxin A, deoxynivalenol, T-2 and HT-2 toxins and zearalenone in various sample extracts giving moderate to strong matrix effects (maize, compound feed, straw, spices). Although the permanent monitoring of a compound provided a qualitative way of evaluating the matrix effects at each retention time, we concluded that it was not adequate as a quantitative approach to correct for the matrix effect. Matrix effects measured by post-extraction addition showed that the strongest ion suppression occurred for the spices (up to -89%). Five different calibration approaches to compensate for matrix effects were compared: multi-level external calibration using isotopically labelled internal standards, multi-level and single level standard addition, and two ways of single-point internal calibration: one point isotopic internal calibration and isotope pattern deconvolution. In general, recoveries and precision meeting the European Union requirements could be achieved with all approaches, with the exception of the single level standard addition at levels too close to the concentration in the sample. When an isotopically labelled internal standard is not available, single-level standard addition is the most efficient option. ; Peer reviewed

We present here a new measurement method for the rapid extraction and accurate quantification of technical nonylphenol (NP) and 4-t-octylphenol (OP) in complex matrix water samples by UHPLC-ESI-MS/MS. The extraction of both compounds is achieved in 30 min by means of hollow fiber liquid phase microextraction (HF-LPME) using 1-octanol as acceptor phase, which provides an enrichment (preconcentration) factor of 800. On the other hand we have developed a quantification method based on isotope dilution mass spectrometry (IDMS) and singly 13C1-labeled compounds. To this end the minimal labeled 13C1-4-(3,6-dimethyl-3-heptyl)-phenol and 13C1-t-octylphenol isomers were synthesized, which coelute with the natural compounds and allows the compensation of the matrix effect. The quantification was carried out by using isotope pattern deconvolution (IPD), which permits to obtain the concentration of both compounds without the need to build any calibration graph, reducing the total analysis time. The combination of both extraction and determination techniques have allowed to validate for the first time a HF-LPME methodology at the required levels by legislation achieving limits of quantification of 0.1 ng mL−1 and recoveries within 97–109%. Due to the low cost of HF-LPME and total time consumption, this methodology is ready for implementation in routine analytical laboratories.

We present here a new measurement method for the rapid extraction and accurate quantification of technical nonylphenol (NP) and 4-t-octylphenol (OP) in complex matrix water samples by UHPLC-ESI-MS/MS. The extraction of both compounds is achieved in 30min by means of hollow fiber liquid phase microextraction (HF-LPME) using 1-octanol as acceptor phase, which provides an enrichment (preconcentration) factor of 800. On the other hand we have developed a quantification method based on isotope dilution mass spectrometry (IDMS) and singly (13)C1-labeled compounds. To this end the minimal labeled (13)C1-4-(3,6-dimethyl-3-heptyl)-phenol and (13)C1-t-octylphenol isomers were synthesized, which coelute with the natural compounds and allows the compensation of the matrix effect. The quantification was carried out by using isotope pattern deconvolution (IPD), which permits to obtain the concentration of both compounds without the need to build any calibration graph, reducing the total analysis time. The combination of both extraction and determination techniques have allowed to validate for the first time a HF-LPME methodology at the required levels by legislation achieving limits of quantification of 0.1ngmL(-1) and recoveries within 97-109%. Due to the low cost of HF-LPME and total time consumption, this methodology is ready for implementation in routine analytical laboratories. ; Peer reviewed

This work describes the optimization, validation and application to real samples of an ultra-high-pressure liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method for the quantification and confirmation of 11 compounds (atrazine, simazine, terbuthylazine, terbumeton, terbutryn and their main transformation products) in surface and wastewater samples. Most of these analytes are included in the list of priority substances in the framework on European Water Policy. The application of this method to water samples reveals that the most relevant transformation products (TPs) should be incorporated into current analytical methods (which are focused mainly on the determination of unchanged compounds), to obtain a more realistic knowledge on water quality regarding pesticide contamination. TPs are generally more polar and mobile than the parents and they can be transported to the aquatic environment more rapidly than their precursors. Additionally, they can present some degree of toxicity and in fact TPs are also included within the legislation on drinking water as pesticide derivatives. To efficiently combine UHPLC with MS/MS, a fast-acquisition triple quadrupole mass analyzer was used. Working in selected reaction monitoring mode, up to three simultaneous transitions per compound were acquired allowing a reliable identification at ng/L levels. The method developed includes a pre-concentration step based on solid-phase extraction (OASIS HLB cartridges). Satisfactory recoveries (70-120%) and relative standard deviations (<20%) were obtained for all compounds in different water samples types spiked at two concentration levels (0.025 and 0.1 μg/L). The optimized method was found to have excellent sensitivity with instrumental detection limits as low as 50 fg. In addition, the influences of the matrix constituents on ionization efficiency and extraction recovery have been studied in different types of Italian and Spanish surface and urban wastewater. Signal suppressions were observed for all compounds, ...

Assessing the presence of pesticides in environmental waters is particularly challenging because of the huge number of substances used which may end up in the environment. Furthermore, the occurrence of pesticide transformation products (TPs) and/or metabolites makes this task even harder. Most studies dealing with the determination of pesticides in water include only a small number of analytes and in many cases no TPs. The present study applied a screening method for the determination of a large number of pesticides and TPs in wastewater (WW) and surface water (SW) from Spain and Italy. Liquid chromatography coupled to high-resolution mass spectrometry (HRMS) was used to screen a database of 450 pesticides and TPs. Detection and identification were based on specific criteria, i.e. mass accuracy, fragmentation, and comparison of retention times when reference standards were available, or a retention time prediction model when standards were not available. Seventeen pesticides and TPs from different classes (fungicides, herbicides and insecticides) were found in WW in Italy and Spain, and twelve in SW. Generally, in both countries more compounds were detected in effluent WW than in influent WW, and in SW than WW. This might be due to the analytical sensitivity in the different matrices, but also to the presence of multiple sources of pollution. HRMS proved a good screening tool to determine a large number of substances in water and identify some priority compounds for further quantitative analysis. ; N. I. Rousis and R. Bade acknowledge the European Union's International Training Network SEWPROF (Marie Curie-FP7-PEOPLE Grant no. 317205) for their Early Stage Researcher contracts. The authors of University Jaume I acknowledge the financial support of Generalitat Valenciana (Prometeo II 2014/023) and of the Spanish Ministry of Economy and Competitiveness (Project ref. CTQ2015-65603). The authors are grateful to J. D. Baggott for English editing.

This study deals with one of the major concerns in mycotoxin determinations: the matrix effect related to LC-MS/ MS systems with electrospray ionization sources. To this end, in a first approach, the matrix effect has been evaluated in two ways: monitoring the signal of a compound (added to the mobile phase) during the entire chromatographicrun, and by classical post-extraction addition. The study was focused on nine selected mycotoxins: aflatoxin B1, fumonisins B1, B2 and B3, ochratoxin A, deoxynivalenol, T-2 and HT-2 toxins and zearalenone in various sample extracts giving moderate to strong matrix effects (maize, compound feed, straw, spices). Although the permanent monitoring of a compound provided a qualitative way of evaluating the matrix effects at each retention time, we concluded that it was not adequate as a quantitative approach to correct for the matrix effect. Matrix effects measured by post-extraction addition showed that the strongest ion suppression occurred for the spices (up to -89%). Five different calibration approaches to compensate for matrix effects were compared: multi-level external calibration using isotopically labelled internal standards, multi-level and single level standard addition, and two ways of singlepoint internal calibration: one point isotopic internal calibration and isotope pattern deconvolution. In general, recoveries and precision meeting the European Union requirements could be achieved with all approaches, with the exception of the single level standard addition at levels too close to the concentration in the sample. When an isotopically labelled internal standard is not available, single-level standard addition is the most efficient option. ; The Dutch Ministry of Economic Affairs is acknowledged for financially supporting this work. The authors acknowledge the financial support from Generalitat Valenciana (Research group of excellence Prometeo 2009/054 and Collaborative Research on Environment and Food Safety ISIC/2012/016). N. Fabregat-Cabello also acknowledges the Generalitat Valenciana for her Ph.D. research grant under the Program VALi+D.

With the increase of the demand of low flavouring smoked seafood products, there is a need of methodologies able to distinguish between different seafood treatments, as not all of them are allowed in all markers. Following this objective, in the present work an untargeted volatolomics approach was applied to identify volatile markers that demonstrate that Cold smoked products can be distinguished from Tasteless smoke neither Carbon monoxide treated seafood, which are prohibited in the European Union. The use of dynamic headspace for the volatile extraction followed by thermal desorption in combination with Gas Chromatography (GC) coupled to single quadrupole Mass Spectrometry (MS) has been employed for the determination of volatile composition of smoked fish. Data processing consisted on the use of PARADISe software, applied for GC/MS data treatment, followed by the multivariate analysis with PLS_Toolbox (MATLAB), and finally the creation and validation of statistical classification model. All 107 variables obtained allowed the construction of a model reaching the correct classification of 97% of the blind samples, while a simplified model with only 11 variables correctly classified up to 93% of the blind samples. These 11 compounds were elucidated to develop subsequent target volatolomics approaches, if needed. Ordered according to the importance in the classification model, the elucidated compounds were: 3-methylcyclopentanone, ethylbenzene, 2-methyl-2-cyclopenten-1-one, 2-methyl-benzofuran, furfuryl alcohol, 2-acetylfuran, acetophenone, guaiacol, 1-hydroxy-2-butanone, 4-vinylguaicol and acetoin. The results demonstrated the great potential of untargeted volatolomics for smoked seafood treatments classification.

The popularity of new psychoactive substances (NPS) has grown in recent years, with certain NPS commonly and preferentially consumed even following the introduction of preventative legislation. With the objective to improve the knowledge on the use of NPS, a rapid and very sensitive method was developed for the determination of ten priority NPS (N-ethylcathinone, methylenedioxypyrovalerone (MDPV), methylone, butylone, methedrone, mephedrone, naphyrone, 25-C-NBOMe, 25-I-NBOMe and 25-B-NBOMe) in influent wastewater. Sample clean-up and pre-concentration was made by off-line solid phase extraction (SPE) with Oasis MCX cartridges. Isotopically labelled internal standards were used to correct for matrix effects and potential SPE losses. Following chromatographic separation on a C18 column within 6 min, the compounds were measured by tandem mass spectrometry in positive ionization mode. The method was optimised and validated for all compounds. Limits of quantification were evaluated by spiking influent wastewater samples at 1 or 5 ng/L. An investigation into the stability of these compounds in influent wastewater was also performed, showing that, following acidification at pH 2, all compounds were relatively stable for up to 7 days. The method was then applied to influent wastewater samples from eight European countries, in which mephedrone, methylone and MDPV were detected. This work reveals that although NPS use is not as extensive as for classic illicit drugs, the application of a highly sensitive analytical procedure makes their detection in wastewater possible. The developed analytical methodology forms the basis of a subsequent model-based back-calculation of abuse rate in urban areas (i.e. wastewater-based epidemiology). ; The authors would like to thank all the personnel of the wastewater treatment plants for their collaboration in providing the samples: Sociedad de Fomento Agrícola Castellonense (FACSA, Castellon, Spain), VEAS (Oslo, Norway), Aquiris (Brussels, Belgium), Hoogheemraadschap de Stichtse ...

The popularity of new psychoactive substances (NPS) has grown in recent years, with certain NPS commonly and preferentially consumed even following the introduction of preventative legislation. With the objective to improve the knowledge on the use of NPS, a rapid and very sensitive method was developed for the determination of ten priority NPS (N-ethylcathinone, methylenedioxypyrovalerone (MDPV), methylone, butylone, methedrone, mephedrone, naphyrone, 25-C-NBOMe, 25-I-NBOMe and 25-B-NBOMe) in influent wastewater. Sample clean-up and pre-concentration was made by off-line solid phase extraction (SPE) with Oasis MCX cartridges. Isotopically labelled internal standards were used to correct for matrix effects and potential SPE losses. Following chromatographic separation on a C18 column within 6 min, the compounds were measured by tandem mass spectrometry in positive ionization mode. The method was optimised and validated for all compounds. Limits of quantification were evaluated by spiking influent wastewater samples at 1 or 5 ng/L. An investigation into the stability of these compounds in influent wastewater was also performed, showing that, following acidification at pH 2, all compounds were relatively stable for up to 7 days. The method was then applied to influent wastewater samples from eight European countries, in which mephedrone, methylone and MDPV were detected. This work reveals that although NPS use is not as extensive as for classic illicit drugs, the application of a highly sensitive analytical procedure makes their detection in wastewater possible. The developed analytical methodology forms the basis of a subsequent model-based back-calculation of abuse rate in urban areas (i.e. wastewater-based epidemiology).

The popularity of new psychoactive substances (NPS) has grown in recent years, with certain NPS commonly and preferentially consumed even following the introduction of preventative legislation. With the objective to improve the knowledge on the use of NPS, a rapid and very sensitive method was developed for the determination of ten priority NPS (N-ethylcathinone, methylenedioxypyrovalerone (MDPV), methylone, butylone, methedrone, mephedrone, naphyrone, 25-C-NBOMe, 25-I-NBOMe and 25-B-NBOMe) in influent wastewater. Sample clean-up and pre-concentration was made by off-line solid phase extraction (SPE) with Oasis MCX cartridges. Isotopically labelled internal standards were used to correct for matrix effects and potential SPE losses. Following chromatographic separation on a C 18 column within 6 min, the compounds were measured by tandem mass spectrometry in positive ionization mode. The method was optimised and validated for all compounds. Limits of quantification were evaluated by spiking influent wastewater samples at 1 or 5 ng/L. An investigation into the stability of these compounds in influent wastewater was also performed, showing that, following acidification at pH 2, all compounds were relatively stable for up to 7 days. The method was then applied to influent wastewater samples from eight European countries, in which mephedrone, methylone and MDPV were detected. This work reveals that although NPS use is not as extensive as for classic illicit drugs, the application of a highly sensitive analytical procedure makes their detection in wastewater possible. The developed analytical methodology forms the basis of a subsequent model-based back-calculation of abuse rate in urban areas (i.e. wastewater-based epidemiology).