Suchergebnisse

Abstract
Construction and demolition workers are exposed to high levels of particulate matter (PM) from building materials throughout their working life. Although nano-enabled building materials (NEBMs) may improve the performance and functionality of buildings, concerns are being raised regarding health risks from occupational exposure to PM from NEBMs. In this work, an experimental set-up for integrated resuspension and characterization of PM from NEBMs was developed and tested using three types of concrete (low density, normal, high strength), each enhanced with Carbon Nanotubes (CNTs) at different concentrations (0, low, high). The performance of portable devices used in occupational exposure assessments (DustTrak and NanoTracer) was compared with stationary instruments and gravimetric filter techniques. 40-70% of the mass and 90-98% of the number of particles were within the respirable fraction, with primary modes at 150 nm and 2-3 µm. Addition of CNTs significantly decreased mean particle number concentrations (PNCs) across the entire characterized size range (7 nm - 20 µm) for low density concrete, whereas the opposite was the case for normal strength and high strength concrete. It was hypothesised that the concrete matrix primarily governs the PM formation, which is in turn modulated by CNT-matrix interactions either suppressing or supporting fragmentation during crushing. SEM imaging could display partially submerged CNTs protruding from concrete fragments. Fundamental interactions at the interface of the nanomaterial and the surrounding matrix needs to be investigated to determine how the PM generated from NEBMs differ from their non-nano counterparts and how to prevent future exposure during demolition.

AbstractThe respiratory tract deposited fraction (DF) is the link between exposure and health effects of airborne particles. Here, we investigate how breathing pattern alterations at increasing physical activity affect DF in different regions of the respiratory tract and compare DF between adults and children (5 and 10 years old). We performed a literature review on the alteration of tidal volume with minute ventilation at increasing physical activity and used the results to model the size resolved (0.001–10 µm) DF, primarily using the deposition models from NCRP and Yeh and Schum (1980), but also MPPD. We found a shift in the deposited size distribution with increasing physical activity—DF of ultrafine particles increased in the alveolar region and decreased in the other regions, while DF of coarser particles decreased in the alveolar region and increased in the extra-thoracic region. Children had a 10–20% higher DF of ultrafine particles in the alveolar region compared to adults. We also present parametrizations of the daily average size resolved (0.005–5 µm) DF, accounting for varying physical activity throughout the day and oral/nasal breathing. These can be applied to any size distribution to estimate deposited doses. We found that deposited mass and number doses were more than twice as high for 5-year-olds compared to adults when normalized for body weight, primarily caused by their higher weight normalized minute ventilation. This demonstrates the importance of studying children's exposure to air pollution and not only rely on data from adults.

Abstract
Waste of electrical and electronic equipment (WEEE) is one of the fastest-growing waste streams in the EU. The airborne occupational and environmental exposures generated by this waste handling are poorly quantified, and the growing use of nanomaterials in electronics adds to the uncertainty of risk assessment. Emission and personal exposure measurements were carried out during industrial recycling for three different metal waste flows: WEEE, metal scrap and cables. Size distributions and number-, mass- and lung deposited surface area concentrations were assessed by on-line techniques, and filter samples were collected for gravimetric analyses, metal content, and electron microscopy. Samples for elemental analyses with Particle Induced X-ray Emission (PIXE) was collected by a 12-stage low-pressure impactor . Additionally, low-cost sensors were deployed for long term monitoring. By number, the size distributions from all three flows were heavily dominated by particles <100 nm. Electron microscopy showed that there are many different elements in the same particle and that the composition of different particles vary considerably. Abundant elements, according to ICP-MS, were Fe, Al, Zn, and Cu, but Pb, Mn, Ba, and Co were also detected. PIXE analysis showed that the chemical composition indeed is different in different particle sizes, with e.g. Cr almost exclusively being present in particles < 200 nm. Low-cost sensors, not previously used for monitoring in highly polluted industrial settings, functioned well after 30 days. This study shows that detailed particle characterization is crucial for understanding of today's and tomorrow's waste recycling exposures, and as input to future toxicological assessments.

Background: Epidemiological studies have shown that many welders experience respiratory symptoms. During the welding process a large number of airborne nanosized particles are generated, which might be inhaled and deposited in the respiratory tract. Knowledge of the underlying mechanisms behind observed symptoms is still partly lacking, although inflammation is suggested to play a central role. The aim of this study was to investigate the effects of welding fume particle exposure on the proteome expression level in welders suffering from respiratory symptoms, and changes in protein mediators in nasal lavage samples were analyzed. Such mediators will be helpful to clarify the pathomechanisms behind welding fume particle-induced effects. Methods: In an exposure chamber, 11 welders with work-related symptoms in the lower airways during the last month were exposed to mild-steel welding fume particles (1 mg/m(3)) and to filtered air, respectively, in a double-blind manner. Nasal lavage samples were collected before, immediately after, and the day after exposure. The proteins in the nasal lavage were analyzed with two different mass spectrometry approaches, label-free discovery shotgun LC-MS/MS and a targeted selected reaction monitoring LC-MS/MS analyzing 130 proteins and four in vivo peptide degradation products. Results: The analysis revealed 30 significantly changed proteins that were associated with two main pathways; activation of acute phase response signaling and activation of LXR/RXR, which is a nuclear receptor family involved in lipid signaling. Connective tissue proteins and proteins controlling the degradation of such tissues, including two different matrix metalloprotease proteins, MMP8 and MMP9, were among the significantly changed enzymes and were identified as important key players in the pathways. Conclusion: Exposure to mild-steel welding fume particles causes measurable changes on the proteome level in nasal lavage matrix in exposed welders, although no clinical symptoms were manifested. The results suggested that the exposure causes an immediate effect on the proteome level involving acute phase proteins and mediators regulating lipid signaling Proteases involved in maintaining the balance between the formation and degradation of extracellular matrix proteins are important key proteins in the induced effects. ; Funding Agencies|Swedish Research Council for Health, Working Life and Welfare [FAS2006-0803]; Swedish Governmental Funding for Clinical Research; Skane County Councils research and development foundation (ALF); FORTE

In the European Union the Annexes of its chemical legislation (REACH) were revised and now clarify the technical data requirements for nanomaterials (NMs). These new provisions, effective from January 1, 2020, introduce requirements for manufacturers, importers and downstream users regarding registration and safety assessment of NMs. This study aims to assess the availability and suitability of methods needed to comply with the new regulatory provisions on NMs for physico-chemical characterisation and environmental fate and effects. The scientific literature and relevant test guideline frameworks were reviewed to identify applicable methods. These were subsequently evaluated and categorised as either: 'internationally accepted test guideline or standard (TGS)', 'internationally accepted test guideline or standard under development (TGSUD)', 'established as standard methods in scientific literature (SCI)', 'other methods and/or more research needed (O)' or 'no method (N)'. We find that 80% of the information requirements and a bit more than 40% of the waiving criteria in the new REACH Annexes are supported by methods that are available as TGS, TGSUD or SCI. Most of the relevant methods in the scientific literature are included in recent OECD guidance documents or ECHA guidance. We recommend that a targeted effort is made to develop protocols and guidelines for methods to determine NM adsorption/desorption, degradation, exposure scenarios and ability to cross biological membranes. Here methods to fulfil the information requirements and waiving criteria are currently lacking. Furthermore, we recommend that increasing attention is directed towards regulatory reliability and relevance of the information that is submitted by the registrants.