Suchergebnisse

[EN] An approach based on sliding mode is proposed in this work for reference tracking in robot visual servoing. In particular, 2 sliding mode controls are obtained depending on whether joint accelerations or joint jerks are considered as the discontinuous control action. Both sliding mode controls are extensively compared in a 3D-simulated environment with their equivalent well-known continuous controls, which can be found in the literature, to highlight their similarities and differences. The main advantages of the proposed method are smoothness, robustness, and low computational cost. The applicability and robustness of the proposed approach are substantiated by experimental results using a conventional 6R industrial manipulator (KUKA KR 6 R900 sixx [AGILUS]) for positioning and tracking tasks. ; Spanish Government, Grant/Award Number: BES-2010-038486; Generalitat Valenciana, Grant/Award Number: BEST/2017/029 and APOSTD/2016/044 ; Muñoz-Benavent, P.; Gracia, L.; Solanes, JE.; Esparza, A.; Tornero, J. (2018). Sliding mode control for robust and smooth reference tracking in robot visual servoing. International Journal of Robust and Nonlinear Control. 28(5):1728-1756. https://doi.org/10.1002/rnc.3981 ; S ; 1728 ; 1756 ; 28 ; 5 ; Hutchinson, S., Hager, G. D., & Corke, P. I. (1996). A tutorial on visual servo control. IEEE Transactions on Robotics and Automation, 12(5), 651-670. doi:10.1109/70.538972 ; Chaumette, F., & Hutchinson, S. (2008). Visual Servoing and Visual Tracking. Springer Handbook of Robotics, 563-583. doi:10.1007/978-3-540-30301-5_25 ; Corke, P. (2011). Robotics, Vision and Control. Springer Tracts in Advanced Robotics. doi:10.1007/978-3-642-20144-8 ; RYAN, E. P., & CORLESS, M. (1984). Ultimate Boundedness and Asymptotic Stability of a Class of Uncertain Dynamical Systems via Continuous and Discontinuous Feedback Control. IMA Journal of Mathematical Control and Information, 1(3), 223-242. doi:10.1093/imamci/1.3.223 ; Chaumette, F., & Hutchinson, S. (2006). Visual servo control. I. ...

In this paper, novel visual servoing techniques based on Pulse Width Modulation (PWM) and Pulse Frequency Modulation (PFM) are presented. In order to apply previous pulse modulations, a fully decoupled position based visual servoing approach (i.e. with block-diagonal interaction matrix) is considered, controlling independently translational and rotational camera motions. These techniques, working at high frequency, could be considered to address the sensor latency problem inherent in visual servoing systems. The expected appearance of ripple due to the concentration of the control action in pulses is quantified and analyzed under simulated scenario. This high frequency ripple does not affect the system performance since it is filtered by the manipulator dynamics. On the contrary it can be seen as a dither signal to minimize the impact of friction and overcome back-lashing. ; This work was supported in part by the Spanish Government under Grant BES-2010-038486 and Project DPI2013-42302-R. ; Muñoz Benavent, P.; Solanes Galbis, JE.; Gracia Calandin, LI.; Tornero Montserrat, J. (2015). PWM and PFM for visual servoing in fully decoupled approaches. Robotics and Autonomous Systems. 65(1):57-64. doi:10.1016/j.robot.2014.11.011 ; S ; 57 ; 64 ; 65 ; 1

[EN] In this work, an approach based on sliding mode ideas is proposed to satisfy constraints in robot visual servoing. In particular, different types of constraints are defined in order to: fulfill the visibility constraints (camera fieldof-view and occlusions) for the image features of the detected object; to avoid exceeding the joint range limits and maximum joint speeds; and to avoid forbidden areas in the robot workspace. Moreover, another task with low-priority is considered to track the target object. The main advantages of the proposed approach are low computational cost, robustness and fully utilization of the allowed space for the constraints. The applicability and effectiveness of the proposed approach is demonstrated by simulation results for a simple 2D case and a complex 3D case study. Furthermore, the feasibility and robustness of the proposed approach is substantiated by experimental results using a conventional 6R industrial manipulator. ; This work was supported in part by the Spanish Government under grants BES-2010-038486 and Project DPI2013-42302-R, and the Generalitat Valenciana under grants VALi+d APOSTD/2016/044 and BEST/2017/029. ; Muñoz-Benavent, P.; Gracia Calandin, LI.; Solanes Galbis, JE.; Esparza Peidro, A.; Tornero Montserrat, J. (2018). Robust fulfillment of constraints in robot visual servoing. Control Engineering Practice. 71(1):79-95. https://doi.org/10.1016/j.conengprac.2017.10.017 ; S ; 79 ; 95 ; 71 ; 1

[EN] This work presents a human-robot closely collaborative solution to cooperatively perform surface treatment tasks such as polishing, grinding, deburring, etc. The method considers two force sensors attached to the manipulator end-effector and tool: one sensor is used to properly accomplish the surface treatment task, while the second one is used by the operator to guide the robot tool. The proposed scheme is based on task priority and adaptive non-conventional sliding mode control. The applicability of the proposed approach is substantiated by experimental results using a redundant 7R manipulator: the Sawyer cobot. ; This work was supported in part by the Spanish Government under the project DPI2017-87656-C2-1-R and the Generalitat Valenciana under Grants VALi + d APOSTD/2016/044 and APOSTD/2017/055. ; Solanes Galbis, JE.; Gracia Calandin, LI.; Muñoz-Benavent, P.; Valls Miro, J.; Girbés, V.; Tornero Montserrat, J. (2018). Human-robot cooperation for robust surface treatment using non-conventional sliding mode control. ISA Transactions. 80(1):528-541. https://doi.org/10.1016/j.isatra.2018.05.013 ; S ; 528 ; 541 ; 80 ; 1

[EN] This work presents a hybrid position-force control of robots for surface polishing using task priority. The robot force control is designed using sliding mode ideas in order to benefit from its inherent robustness and low computational cost. In order to avoid the chattering drawback typically present in sliding mode control, several chattering-free controllers are evaluated and tested. A distinctive feature of the method is that the sliding mode force task is defined using not only equality constraints but also inequality constraints, which are satisfied using conventional and nonconventional sliding mode control, respectively. Moreover, a lower priority tracking controller is defined to follow the desired reference trajectory on the surface being polished. The applicability and the effectiveness of the proposed approach considering the mentioned chattering-free controllers are substantiated by experimental results using a redundant 7R manipulator. ; Spanish Government, Agencia Estatal de Investigacion (DPI2017-87656-C2-1-R). Generalitat Valenciana, Conselleria d'Educacion, Investigacion, Cultura i Esport (VALi+d APOSTD/2016/044). ; Solanes Galbis, JE.; Gracia Calandin, LI.; Muñoz-Benavent, P.; Valls Miro, J.; Perez-Vidal, C.; Tornero Montserrat, J. (2019). Robust Hybrid Position-Force Control for Robotic Surface Polishing. Journal of Manufacturing Science and Engineering. 141(1):1-14. https://doi.org/10.1115/1.4041836 ; S ; 1 ; 14 ; 141 ; 1

[EN] This paper presents a human-robot closely collaborative solution to cooperatively perform surface treatment tasks such as polishing, grinding, finishing, deburring, etc. The proposed scheme is based on task priority and non-conventional sliding mode control. Furthermore, the proposal includes two force sensors attached to the manipulator end-effector and tool: one sensor is used to properly accomplish the surface treatment task, while the second one is used by the operator to guide the robot tool. The applicability and feasibility of the proposed collaborative solution for robotic surface treatment are substantiated by experimental results using a redundant 7R manipulator: the Sawyer collaborative robot. ; This work was supported in part by the Spanish Government under the project DPI-201787656-C2-1-R and the Generalitat Valenciana under Grant VALi+d. ; Gracia Calandin, LI.; Solanes Galbis, JE.; Muñoz-Benavent, P.; Valls Miro, J.; Perez-Vidal, C.; Tornero Montserrat, J. (2019). Human-robot collaboration for surface treatment tasks. Interaction Studies. 20(1):148-184. https://doi.org/10.1075/is.18010.gra ; S ; 148 ; 184 ; 20 ; 1 ; Angel-Fernandez, J. M., & Bonarini, A. (2016). Robots Showing Emotions. Interaction Studies / Social Behaviour and Communication in Biological and Artificial Systems, 17(3), 408-437. doi:10.1075/is.17.3.06ang ; Arnal, L., Solanes, J. E., Molina, J., & Tornero, J. (2017). Detecting dings and dents on specular car body surfaces based on optical flow. Journal of Manufacturing Systems, 45, 306-321. doi:10.1016/j.jmsy.2017.07.006 ; Chiaverini, S., Oriolo, G., & Walker, I. D. (2008). Kinematically Redundant Manipulators. Springer Handbook of Robotics, 245-268. doi:10.1007/978-3-540-30301-5_12 ; Dimeas, F., & Aspragathos, N. (2016). Online Stability in Human-Robot Cooperation with Admittance Control. IEEE Transactions on Haptics, 9(2), 267-278. doi:10.1109/toh.2016.2518670 ; Edwards, C., & Spurgeon, S. (1998). Sliding Mode Control. doi:10.1201/9781498701822 ; Engeberg, ...

1 14 141 ; S ; [EN] This work presents a hybrid position-force control of robots for surface polishing using task priority. The robot force control is designed using sliding mode ideas in order to benefit from its inherent robustness and low computational cost. In order to avoid the chattering drawback typically present in sliding mode control, several chattering-free controllers are evaluated and tested. A distinctive feature of the method is that the sliding mode force task is defined using not only equality constraints but also inequality constraints, which are satisfied using conventional and nonconventional sliding mode control, respectively. Moreover, a lower priority tracking controller is defined to follow the desired reference trajectory on the surface being polished. The applicability and the effectiveness of the proposed approach considering the mentioned chattering-free controllers are substantiated by experimental results using a redundant 7R manipulator. Solanes Galbis, JE.; Gracia Calandin, LI.; Muñoz-Benavent, P.; Valls Miro, J.; Perez-Vidal, C.; Tornero Montserrat, J. (2019). Robust Hybrid Position-Force Control for Robotic Surface Polishing. Journal of Manufacturing Science and Engineering. 141(1):1-14. https://doi.org/10.1115/1.4041836 ; Spanish Government, Agencia Estatal de Investigacion (DPI2017-87656-C2-1-R). Generalitat Valenciana, Conselleria d'Educacion, Investigacion, Cultura i Esport (VALi+d APOSTD/2016/044).

[EN] This work presents a hybrid position-force control of robots in order to apply surface treatments such as polishing, grinding, finishing, deburring, etc. The robot force control is designed using sliding mode concepts to benefit from robustness. In particular, the sliding mode force task is defined using equality constraints to attain the desired tool pressure on the surface, as well as to keep the tool orientation perpendicular to the surface. In order to deal with sudden changes in material stiffness, which are ultimately transferred to the polishing tool and can produce instability and compromise polishing performance, several adaptive switching gain laws are considered and compared. Moreover, a lower priority tracking controller is defined to follow the desired reference trajectory on the surface being polished. Hence, deviations from the reference trajectory are allowed if such deviations are required to satisfy the constraints mentioned above. Finally, a third-level task is also considered for the case of redundant robots in order to use the remaining degrees of freedom to keep the manipulator close to the home configuration with safety in mind. The main advantages of the method are increased robustness and low computational cost. The applicability and effectiveness of the proposed approach are substantiated by experimental results using a redundant 7R manipulator: the Rethink Robotics Sawyer collaborative robot. ; This work was supported in part by the Spanish Government under the project DPI2017-87656-C2-1-R and the Generalitat Valenciana under Grants VALi + d APOSTD/2016/044 and BEST/2017/029. ; Gracia Calandin, LI.; Solanes Galbis, JE.; Muñoz-Benavent, P.; Valls Miro, J.; Perez-Vidal, C.; Tornero Montserrat, J. (2018). Adaptive Sliding Mode Control for Robotic Surface Treatment Using Force Feedback. Mechatronics. 52:102-118. https://doi.org/10.1016/j.mechatronics.2018.04.008 ; S ; 102 ; 118 ; 52

[EN] This work presents an approach based on multi-task, non-conventional sliding mode control and admittance control for human-robot collaboration aimed at handling applications using force feedback. The proposed robot controller is based on three tasks with different priority levels in order to cooperatively perform the safe transportation of an object with a human operator. In particular, a high-priority task is developed using non-conventional sliding mode control to guarantee safe reference parameters imposed by the task, e.g., keeping a load at a desired orientation (to prevent spill out in the case of liquids, or to reduce undue stresses that may compromise fragile items). Moreover, a second task based on a hybrid admittance control algorithm is used for the human operator to guide the robot by means of a force sensor located at the robot tool. Finally, a third low-priority task is considered for redundant robots in order to use the remaining degrees of freedom of the robot to achieve a pre-set secondary goal (e.g., singularity avoidance, remaining close to a homing configuration for increased safety, etc.) by means of the gradient projection method. The main advantages of the proposed method are robustness and low computational cost. The applicability and effectiveness of the proposed approach are substantiated by experimental results using a redundant 7R manipulator: the Sawyer collaborative robot. (C) 2018 Elsevier B.V. All rights reserved. ; This work was supported in part by the Spanish Government under Project DPI2017-87656-C2-1-R, and the Generalitat Valenciana under Grants VALi+d APOSTD/2016/044 and BEST/2017/029. ; Solanes Galbis, JE.; Gracia Calandin, LI.; Muñoz-Benavent, P.; Valls Miro, J.; Carmichael, MG.; Tornero Montserrat, J. (2018). Human-robot collaboration for safe object transportation using force feedback. Robotics and Autonomous Systems. 107:196-208. https://doi.org/10.1016/j.robot.2018.06.003 ; S ; 196 ; 208 ; 107

[EN] This work presents a hybrid position/force control of robots aimed at handling applications using multi-task and sliding mode ideas. The proposed robot control is based on a novel adaptive non-conventional sliding mode control used to robustly satisfy a set of inequality constraints defined to accomplish the cooperative transport task. In particular, these constraints are used to guarantee the reference parameters imposed by the task (e.g., keeping the load at a desired orientation) and to guide the robot using the human operator's forces detected by a force sensor located at the robot tool. Another feature of the proposal is the multi-layered nature of the strategy, where a set of four tasks are defined with different priorities. The effectiveness of the proposed adaptive non-conventional sliding mode control is illustrated by simulation results. Furthermore, the applicability and feasibility of the proposed robot control for transport tasks are substantiated by experimental results using a redundant 7R manipulator. ; This work was supported in part by the Spanish Government under Project DPI2017-87656-C2-1-R, and the Generalitat Valenciana under Grants VALi + d APOSTD/2016/044 and BEST/2017/029. ; Gracia Calandin, LI.; Solanes Galbis, JE.; Muñoz-Benavent, P.; Esparza Peidro, A.; Valls Miro, J.; Tornero Montserrat, J. (2018). Cooperative transport tasks with robots using adaptive non-conventional sliding mode control. Control Engineering Practice. 78:35-55. https://doi.org/10.1016/j.conengprac.2018.06.005 ; S ; 35 ; 55 ; 78

[EN] This work presents a hybrid position/force control of robots for surface contact conditioning tasks such as polishing, profiling, deburring, etc. The robot force control is designed using sliding mode ideas to benefit from robustness. On the one hand, a set of equality constraints are defined to attain the desired tool pressure on the surface, as well as to keep the tool orientation perpendicular to the surface. On the other hand, inequality constraints are defined to adapt the tool position to unmodeled features present in the surface, e.g., a protruding window frame. Conventional and non-conventional sliding mode controls are used to fulfill the equality and inequality constraints, respectively. Furthermore, in order to deal with sudden changes of the material stiffness, which are forwarded to the robot tool and can produce instability and bad performance, adaptive switching gain laws are considered not only for the conventional sliding mode control but also for the non-conventional sliding mode control. A lower priority tracking controller is also defined to follow the desired reference trajectory on the target surface. Moreover, the classical admittance control typically used in force control tasks is adapted for the proposed surface contact application in order to experimentally compare the performance of both control approaches. The effectiveness of the proposed method is substantiated by experimental results using a redundant 7R manipulator, whereas its advantages over the classical admittance control approach are experimentally shown. ; This work was supported in part by the Spanish Government under the Project DPI2017-87656-C2-1-R and the Generalitat Valenciana under Grants VALi+d APOSTD/2016/044 and BEST/2017/029. ; Solanes Galbis, JE.; Gracia Calandin, LI.; Muñoz-Benavent, P.; Esparza Peidro, A.; Valls Miro, J.; Tornero Montserrat, J. (2018). Adaptive robust control and admittance control for contact-driven robotic surface conditioning. Robotics and Computer-Integrated Manufacturing. 54:115-132. ...

196 208 107 ; S ; [EN] This work presents an approach based on multi-task, non-conventional sliding mode control and admittance control for human-robot collaboration aimed at handling applications using force feedback. The proposed robot controller is based on three tasks with different priority levels in order to cooperatively perform the safe transportation of an object with a human operator. In particular, a high-priority task is developed using non-conventional sliding mode control to guarantee safe reference parameters imposed by the task, e.g., keeping a load at a desired orientation (to prevent spill out in the case of liquids, or to reduce undue stresses that may compromise fragile items). Moreover, a second task based on a hybrid admittance control algorithm is used for the human operator to guide the robot by means of a force sensor located at the robot tool. Finally, a third low-priority task is considered for redundant robots in order to use the remaining degrees of freedom of the robot to achieve a pre-set secondary goal (e.g., singularity avoidance, remaining close to a homing configuration for increased safety, etc.) by means of the gradient projection method. The main advantages of the proposed method are robustness and low computational cost. The applicability and effectiveness of the proposed approach are substantiated by experimental results using a redundant 7R manipulator: the Sawyer collaborative robot. (C) 2018 Elsevier B.V. All rights reserved. This work was supported in part by the Spanish Government under Project DPI2017-87656-C2-1-R, and the Generalitat Valenciana under Grants VALi+d APOSTD/2016/044 and BEST/2017/029. Solanes Galbis, JE.; Gracia Calandin, LI.; Muñoz-Benavent, P.; Valls Miro, J.; Carmichael, MG.; Tornero Montserrat, J. (2018). Human-robot collaboration for safe object transportation using force feedback. Robotics and Autonomous Systems. 107:196-208. https://doi.org/10.1016/j.robot.2018.06.003

35 55 78 ; S ; [EN] This work presents a hybrid position/force control of robots aimed at handling applications using multi-task and sliding mode ideas. The proposed robot control is based on a novel adaptive non-conventional sliding mode control used to robustly satisfy a set of inequality constraints defined to accomplish the cooperative transport task. In particular, these constraints are used to guarantee the reference parameters imposed by the task (e.g., keeping the load at a desired orientation) and to guide the robot using the human operator's forces detected by a force sensor located at the robot tool. Another feature of the proposal is the multi-layered nature of the strategy, where a set of four tasks are defined with different priorities. The effectiveness of the proposed adaptive non-conventional sliding mode control is illustrated by simulation results. Furthermore, the applicability and feasibility of the proposed robot control for transport tasks are substantiated by experimental results using a redundant 7R manipulator. This work was supported in part by the Spanish Government under Project DPI2017-87656-C2-1-R, and the Generalitat Valenciana under Grants VALi + d APOSTD/2016/044 and BEST/2017/029. Gracia Calandin, LI.; Solanes Galbis, JE.; Muñoz-Benavent, P.; Esparza Peidro, A.; Valls Miro, J.; Tornero Montserrat, J. (2018). Cooperative transport tasks with robots using adaptive non-conventional sliding mode control. Control Engineering Practice. 78:35-55. https://doi.org/10.1016/j.conengprac.2018.06.005