Suchergebnisse

Abstract
This article describes responses to a questionnaire on current work practices and understanding of the management of dermal exposure issues in the workplace from members of the British Occupational Hygiene Society (BOHS) and the Australian Institute of Occupational Hygienists (AIOH). The survey comprised questions in four key areas: employment demographics, experience managing dermal exposure, knowledge of dermal exposure management, and opinions on professional knowledge gaps and preferred training methods. The survey was disseminated in 2016 in the UK and 2018 in Australia, with 116 and 114 responses from each jurisdiction, respectively. The majority of respondents had personally evaluated the risks of dermal exposure to chemicals (BOHS 92%; AIOH 86%), albeit infrequently (less than a few times per year). Occupational Hygienists reportedly adopted a range of strategies to control dermal exposure problems, including chemical elimination/substitution (BOHS 68%; AIOH 68%), changing work practices (BOHS 79%; AIOH 75%), and education (BOHS 77%; AIOH 83%). The use of gloves or other personal protective equipment remained the most commonly cited exposure control measure (BOHS 99%; AIOH 97%). While there appeared to be a good understanding of common dermal exposure workplace scenarios (e.g. isocyanate exposure in motor vehicle repair, solvent exposure during spray painting), the overwhelming majority of respondents wished to find out more about assessing the risks from dermal exposure to chemicals (BOHS 89%; AIOH 88%). The outcomes suggest ways to increase the competence of professionals in dealing with dermal exposure matters in the workplace, through mechanisms such as web-based guidance, interactive educational materials and webinars, as well as workshops and seminars.

Abstract
Artificial stone (AS) is a composite material that has seen widespread use in construction, particularly for kitchen benchtops. However, fabrication processes with AS have been associated with serious lung disease. Safety data sheets (SDSs) aim to provide important information pertaining to composition and health risks. In the case of a complex mixture, SDSs may be problematic in terms of specific information on overall health risks. To assess this issue, we compared empirically determined mineral, metallic, and organic resin content of 25 individual AS products across six suppliers, with the corresponding SDS information. X-ray diffraction was used to quantitate the mineralogical components of AS samples, and X-ray fluorescence was used to estimate the metallic components. Organic material (resin content) was estimated using weight loss during calcination. Although the resin content for all AS samples was within the SDS-reported ranges, there was considerable variability in the crystalline silica content when comparing with supplier's SDS. Potentially toxicologically relevant metallic and mineral constituents were not reported. Some supplier SDSs were found to provide more information than others. Only one of the six suppliers provided crystalline mineral content other than silica, and only two suppliers provided any information about metals. There remains a limited understanding of lung pathogenesis from AS, and this study highlights the need for more comprehensive and standardized SDS information for risk assessment and management.

Abstract
Concerns regarding indoor air quality, particularly the presence of fungi and moulds, are increasing. The potential for essential oils to reduce, control or remove fungi, is gaining interest as they are seen as a "natural" alternative to synthetic chemical fungicides. This review examines published research on essential oils as a method of fungal control in indoor environments. It was difficult to compare the relative performances of essential oils due to differences in research methods and reporting languages. In addition, there are limited studies that scale up laboratory results and assess the efficacy of essential oils within building environments. However, generally, there appears to be some evidence to support the essential oils clove oil, tea tree oil, oregano, thyme and lemon as potential antifungal agents. Essential oils from heartwood, marjoram, cinnamon, lemon basil, caraway, bay tree, fir, peppermint, pine, cedar leaf and manuka were identified in at least one study as having antifungal potential. Future studies should focus on comparing the effectiveness of these essential oils against a large number of fungal isolates from indoor environments. Studies will then need to focus on translating these results into realistic application methods, in actual buildings, and assess the potential for long-term antifungal persistence.

Abstract
Engineered stones are often characterized for their crystalline silica content. Their organic composition, particularly that of the emissions generated during fabrication work using hand-held power tools, is relatively unexplored. We forensically screened the emissions from dry-cutting 12 engineered stone products in a test chamber for their organic composition by pyrolysis-gas chromatography-mass spectrometry (GC-MS) plus selected traditional capture and analysis techniques. Phthalic anhydride, which has a Respiratory Sensitization (RSEN) Notation by the American Conference of Governmental Industrial Hygienists (ACGIH), was the most common and abundant compound, at 26–85% of the total organic composition of engineered stone emissions. Benzaldehyde and styrene were also present in all twelve samples. During active cutting, the predominant volatile organic compound (VOC) emitted was styrene, with phthalic anhydride, benzene, ethylbenzene, and toluene also detected. These results have important health implications as styrene and phthalic anhydride are irritants to the respiratory tract. This study suggests a risk of concurrent exposure to high levels of respirable crystalline silica and organic lung irritants during engineered stone fabrication work.

Abstract
Ortho-phthalaldehyde (OPA) is used as a high-level disinfectant for reusable medical devices in healthcare settings. The ACGIH recently adopted a Threshold Limit Value–Surface Limit (TLV–SL; 25 µg/100 cm2) for OPA surface contamination to prevent induction of dermal and respiratory sensitization following dermal exposure. However, there is no current validated method to measure OPA surface contamination. This study aimed to develop a standardized approach for sample collection and quantitative determination of OPA from work surfaces for use in risk assessment practices. The reported method utilises readily available commercial wipes to collect surface samples coupled with direct detection of OPA via liquid chromatography time of flight mass spectrometry (LC–ToF–MS). This approach avoided complex derivatization steps commonly required for the analysis of aldehydes. Method evaluation was conducted in accordance with the Occupational Safety and Health Administration (OSHA) surface sampling guidelines. Overall recoveries of 25 µg/100 cm2 of OPA from stainless steel and glass surfaces were 70% and 72%, respectively. The reported LOD for this method was 1.1 µg/sample and the LOQ was 3.7 µg/sample. OPA remained stable on the sampling medium for up to 10 days, when stored at 4 °C. The method was demonstrated in a workplace surface assessment at a local hospital sterilising unit, successfully detecting OPA on work surfaces. This method is intended to supplement airborne exposure assessment and provide a quantitative assessment tool for potential dermal exposure. When used in conjunction with a thorough occupational hygiene program that includes hazard communication, engineering controls, and personal protective equipment, skin exposure and consequent sensitization risks in the workplace can be minimized.