Suchergebnisse

Path planning and path following are core components in safe autonomous driving. Typically, a path planner provides a path with some tolerance on how tightly the path should be followed. Based on that, and other path characteristics, for example, sharpness of curves, a speed profile needs to be assigned so that the vehicle can stay within the given tolerance without going unnecessarily slow. Here, such trajectory planning is based on optimal control formulations where critical cases arise as on-the-limit solutions. The study focuses on heavy commercial vehicles, causing rollover to be of a major concern, due to the relatively high centre of gravity. Several results are obtained on required model complexity depending on path characteristics, for example, quantification of required path tolerance for a simple model to be sufficient, quantification of when yaw inertia needs to be considered in more detail, and how the curvature rate of change interplays with available friction. Overall, in situations where the vehicle is subject to a wide range of driving conditions, from good transport roads to more tricky avoidance manoeuvres, the requirements on the path following will vary. For this, the provided results form a basis for real-time path following. ; Funding Agencies|iQMatic project - innovation and research programme FFI/VINNOVA; Strategic Area for ICT research ELLIIT - Swedish Government within the Linnaeus Center CADICS; Swedish Research Council

Engine misfire detection is an important part of the On-Board Diagnostics (OBDII) legislations to reduce exhaust emissions and avoid damage to the catalytic converters. The flywheel angular velocity signal is analyzed, investigating how to use the signal in order to best detect misfires. An algorithm for engine misfire detection is proposed based on the flywheel angular velocity signal. The flywheel signal is used to estimate the torque at the flywheel and a test quantity is designed by weighting and thresholding the samples of estimated torque related to one combustion. During the development process, the Kullback-Leibler divergence is used to analyze the ability to detect a misfire given a test quantity and how the misfire detectability performance varies depending on, e.g., load and speed. The Kullback-Leibler divergence is also used for parameter optimization to maximize the difference between misfire data and fault-free data. Evaluation shows that the proposed misfire detection algorithm is able to have a low probability of false alarms while having a low probability of missed detections.

Fault detection and isolation (FDI) in automotive diesel engines is important in order to achieve and guarantee low exhaust emissions, high vehicle uptime, and efficient repair and maintenance. This paper illustrates how a set of general methods for model-based sequential residual generation and data-driven statistical residual evaluation can be combined into an automated design methodology. The automated design methodology is then utilized to create a complete FDI-system for an automotive diesel engine. The performance of the obtained FDI-system is evaluated using measurements from road drives and engine test-bed experiments. The overall performance of the FDI-system is good in relation to the required design effort. In particular no specific tuning of the FDI-system, or any adaption of the design methodology, was needed. It is illustrated how estimations of the statistical powers of the fault detection tests in the FDI-system can be used to further increase the performance, specifically in terms of fault isolability. ; Funding Agencies|Scania||VINNOVA (Swedish Governmental Agency for Innovation Systems)||