Suchergebnisse

A new accelerated creep assessment method to evaluate the creep performance of metals and alloys from high-temperature tensile tests, i.e. slow-strain-rate testing (SSRT), is proposed and evaluated. The method consists of decomposing the inelastic strain into a plastic and creep component by adopting general assumptions on the inelastic strain behaviour of materials, formulated using a state variable formalism and verified by tensile tests with intermediate dwell times at constant stress. Either, the plastic and creep strain components are considered non-interacting and additive, as observed in the stainless steel AISI 316L at 600 °C. Or, as in the case of the ductile cast iron EN-GJS-SiMo5-1 at 500 °C and the nickel-base superalloy Hastelloy X at 800 °C, the components are considered unified, meaning that the effect of inelastic straining is the same irrespective of whether it is caused through creep at constant stress or by plastic deformation due to an instantaneous stress increase. Based on these assumptions, the proposed method is used to assess the creep strain from SSRT in good agreement with conventional creep test results. ; Funding: Swedish Governmental Agency for Innovation SystemsVinnova [2018-04302]; Sandvik Materials Technology

The complicated constitutive behaviour of cast iron, involving a non-linear elastic regime, tension-compression stress asymmetry, varying elastic modulus and an inflection in the tension-to-compression hardening curve, is investigated using a micromechanical modelling approach. In this way, it is demonstrated that the abnormalities observed in the constitutive behaviour are qualitatively and quantitatively explained by the interaction behaviour between the matrix and graphite constituents. In initial tension, the absence of linearity is rationalised by the successive loss in load-carrying capacity of the graphite phase due to debonding, which in subsequent cycling, results in the opening and re-contact of the matrix-graphite interface. This effect is demonstrated to result in tension-compression asymmetry in stress and elastic modulus, as well as the inflection in tension-to-compression loading. The given model of explanation is validated by comparison to the experimentally acquired microscopic strain field in EN-GJV-400 at locations where stress concentrations are generated due to the matrix-graphite debonding, using high-resolution digital image correlation of scanning electron images. ; Funding Agencies|Scania CV AB; Swedish Governmental Agency for Innovation Systems [FFI - 2012 - 03625]; Swedish Foundation for Strategic Research [SM12 - 0014]; Strategic Faculty Grant AFM (SFO - MAT - LiU) at Linkoping University [2009 -00971]