Suchergebnisse

The paper deals with the issue of humidity and the unhealthy environment of old buildings. Humidity is a very widespread problem not only in historical buildings, but also in newer buildings. This problem can be observed in various parts of the world and thus it can be said that it is a global problem. Humidity in these buildings causes an unhealthy environment, which has a negative effect on individual building constructions, but also on people's health. Humidity is also associated with the form of disruption of the individual layers of the construction and the disruption of the thermal resistance of these constructions. Buildings such as these subsequently have an unhealthy environment. After a part of the description of the known issue, the contribution follows on from this part by indicating possible remedial interventions and analyses the systems of additional thermal insulation (ETICS, ATP), ensuring the improvement of the internal environment. Finally, the article presents possible connections and extensions of this research and its application directly in practice. The results of the proposed research will significantly contribute to the approach to rehabilitated older buildings and their long-term sustainability from an economic point of view, as well as the possible use of them.

The paper presents partial outputs from an experiment that demonstrated the impact of applying an additional insulation on an existing contact insulation system with a green-algae surface. The aim was mainly to detect the development of microorganisms in the gap between the original and the new insulation. The existing ETICS on the polystyrene-based contact thermal insulation system and EPS-based additional thermal insulation were used in the experiment. A theoretical modelling of temperature conditions showed that this type of doubling the insulation presented the highest risk of condensation of water in the gap between the insulation layers and that these conditions presented suitable humidity conditions for the growth of microorganisms. The reason for the experiment is to demonstrate the need to eliminate microorganisms before applying an additional thermal insulation to surfaces with biocorrosion. This is especially the case where EPS is used. The temperature and humidity parameters obtained during the experiment can be used to model the moisture regime in the gap of other types of insulations (e.g. MW, PUR, PIR.)

Building structures with integrated energy-active elements (BSIEAE) present a progressive alternative for building construction with multifunctional energy functions. The aim was to determine the energy potential of a building envelope with integrated energy-active elements in the function of direct-heating, semi-accumulation and accumulation of large-area radiant heating. The research methodology consists in an analysis of building structures with energy-active elements, creation of mathematical-physical models based on the simplified definition of heat and mass transfer in radiant large-area heating, and a parametric study of the energy potential of individual variants of technical solutions. The results indicate that the increase in heat loss due to the location of the tubes in the structure closer to the exterior is negligible for Variant II, semi-accumulation heating, and Variant III, accumulation heating, as compared to Variant I, direct heating, it is below 1 % of the total delivered heat flux. The direct heat flux to the heated room is 89.17 %, 73.36 %, and 58.46 % of the total heat flux for Variant I, Variant II and Variant III, respectively. For Variant II and Variant III, the heat storage accounts for 14.84 %, and 29.86 % of the total heat flux, respectively. Variants II and III appear to be promising in terms of heat/cool accumulation with an assumption of lower energy demand (at least 10 %) than for low inertia walls. We plan to extend these simplified parametric studies with dynamic computer simulations to optimise the design and composition of the panels with integrated energy-active elements.