Suchergebnisse

As a part of the change towards a higher usage of renewable energy sources, which naturally deliver the energy intermittently, the need for energy storage systems is increasing. For the compensation of the disturbance in power production due to inter-day to seasonal weather changes, a long-term energy storage is required. In the spectrum of storage systems, one out of a few geographically independent possibilities is the use of heat to store electricity, so-called Carnot-batteries. This paper presents a Pumped Thermal Energy Storage (PTES) system based on a recuperated and recompressed supercritical CO2 Brayton cycle. It is analysed if this configuration of a Brayton cycle, which is most advantageous for supercritical CO2 Brayton cycles, can be favourably integrated into a Carnot-battery and if a similar high efficiency can be achieved, despite the constraints caused by the integration. The modelled PTES operates at a pressure ratio of 3 with a low nominal pressure of 8 MPa, in a temperature range between 16 °C and 513 °C. The modelled system provides a round-trip efficiency of 38.9 % and was designed for a maximum of 3.5 MW electric power output. The research shows that an acceptable round-trip efficiency can be achieved with a recuperated and recompressed Brayton Cycle employing supercritical CO2 as the working fluid. However, a higher efficiency would be expected to justify the complexity of the configuration.

AbstractChina is committed to the targets of achieving peak CO2 emissions around 2030 and realizing carbon neutrality around 2060. To realize carbon neutrality, people are seeking to replace fossil fuel with renewable energy. Thermal energy storage is the key to overcoming the intermittence and fluctuation of renewable energy utilization. In this paper, the relation between renewable energy and thermal energy storage is first addressed. Then, the classifications of thermal energy storage and Carnot batteries are given. The aim of this review is to provide an insight into the promising thermal energy storage technologies for the application of renewable energy in order to realize carbon neutrality. Three types of heat storage methods, especially latent heat storage and thermochemical heat storage, are analyzed in detail. The application of thermal energy storage is influenced by many heat storage properties, such as temperature range, heat storage capacity, cost, stability, and technical readiness. Therefore, the heat storage properties for different heat storage technologies are reviewed and compared. The advantage and challenge of different heat storage technologies and Carnot batteries for carbon neutrality processes are analyzed. Finally, the prospects of different heat storage technologies are summarized.