Suchergebnisse

The effects of increasing doses of three exogenous enzymes preparations with fibrolytic activity (FIB - 0, 0.6, 1.2, 1.8, and 2.4 mg mL-1liquid volume incubated), amylolytic activity (AMZ - 0, 0.05, 0.10, 0.15, and 0.20 mg mL-1liquid volume incubated), and proteolytic activity (PRO - 0, 0.05, 0.10, 0.15, and 0.20 mg mL-1 liquid volume incubated ) on gas production (GP), kinetic parameters, and fermentation profile of Brachiaria brizantha cv. Marandu were evaluated using the in vitro gas production technique. Ruminal liquid was obtained from two rumen-cannulated Santa Inês sheep maintained on pasture. Accumulated gas production was measured during 96 hours of incubation, measured at 18 different time points. The determined parameters were pH, asymptotic gas production (mL g-1), rate of gas production (h-1), lag time (h), organic matter digestibility (OMD, g g-1 DM), metabolizable energy (ME, MJ kg-1 DM), and neutral detergent fiber digestibility (NDFD, mg g-1 DM). Increasing the FIB dose linearly increased (P < 0.05) the asymptotic gas production. However, the rate of gas production and the lag time showed linear decreases (P < 0.05). Addition of FIB also linearly increased (P < 0.05) the GP at all incubation times, as well as the OMD, NDFD and ME. Addition of AMZ linearly increased (P < 0.05) the asymptotic gas production, but GP linear increased (P < 0.05) only at the 6-hour and 12-hour time points. The rate of gas production and the lag time decreased linearly (P < 0.05) in response to increasing AMZ addition. Inclusion of PRO did not affect (P > 0.05) asymptotic gas production, but there was quadratic effect (P < 0.05) on the rate of gas production, the lag time, and the GP at the 6-hour and 12-hour time points. The OMD, NDFD and ME were not affected by PRO addition. Thus, fibrolytic, amylolytic and proteolytic enzymes are effective in reducing the lag time and increasing the in vitro gas production from Brachiaria Brizantha cv. Marandu forage, and fibrolytic enzymes improve the in vitro fermentation profile.

Elasmobranchs, the group of cartilaginous fishes that include sharks and rays, are especially vulnerable to overfishing due to low fecundity and late sexual maturation. A significant number of elasmobranch species are currently overexploited or threatened by fisheries activities. Additionally, several recent reports have indicated that there has been a reduction in regional elasmobranch population sizes. Brazil is an important player in elasmobranch fisheries and one of the largest importers of shark meat. However, carcasses entering the shark meat market have usually had their fins and head removed, which poses a challenge to reliable species identification based on the morphology of captured individuals. This is further complicated by the fact that the internal Brazilian market trades several different elasmobranch species under a common popular name: "cação." The use of such imprecise nomenclature, even among governmental agencies, is problematic for both controlling the negative effects of shark consumption and informing the consumer about the origins of the product. In this study, we used DNA barcoding (mtDNA, COI gene) to identify, at the species level, "cação" samples available in local markets from Southern Brazil. We collected 63 samples traded as "cação," which we found to correspond to 20 different species. These included two teleost species: Xiphias gladius (n = 1) and Genidens barbus (n = 6), and 18 species from seven elasmobranch orders (Carcharhiniformes, n = 42; Squaliformes, n = 3; Squatiniformes, n = 2; Rhinopristiformes, n = 4; Myliobatiformes, n = 3; Rajiformes, n = 1; and Torpediniformes, n = 1). The most common species in our sample were Prionace glauca (n = 15) and Sphyrna lewini (n = 14), while all other species were represented by four samples or less. Considering IUCN criteria, 47% of the elasmobranch species found are threatened at the global level, while 53% are threatened and 47% are critically endangered in Brazil. These results underline that labeling the meat of any shark species as "cação" is problematic for monitoring catch allocations from the fishing industry and discourages consumer engagement in conservationist practices through informed decision-making.

Following a brief historical summary of the way in which electron beam lithography developed out of the scanning electron microscope, three state-of-the-art charged-particle beam nanopatterning technologies are considered. All three have been the subject of a recently completed European Union Project entitled "Single Nanometre Manufacturing: Beyond CMOS". Scanning helium ion beam lithography has the advantages of virtually zero proximity effect, nanoscale patterning capability and high sensitivity in combination with a novel fullerene resist based on the sub-nanometre C60 molecule. The shot noise-limited minimum linewidth achieved to date is 6 nm. The second technology, focused electron induced processing (FEBIP), uses a nozzle-dispensed precursor gas either to etch or to deposit patterns on the nanometre scale without the need for resist. The process has potential for high throughput enhancement using multiple electron beams and a system employing up to 196 beams is under development based on a commercial SEM platform. Among its potential applications is the manufacture of templates for nanoimprint lithography, NIL. This is also a target application for the third and final charged particle technology, viz. field emission electron scanning probe lithography, FE-eSPL. This has been developed out of scanning tunneling microscopy using lower-energy electrons (tens of electronvolts rather than the tens of kiloelectronvolts of the other techniques). It has the considerable advantage of being employed without the need for a vacuum system, in ambient air and is capable of sub-10 nm patterning using either developable resists or a self-developing mode applicable for many polymeric resists, which is preferred. Like FEBIP it is potentially capable of massive parallelization for applications requiring high throughput.

The turbot is a flatfish (Pleuronectiformes) with increasing commercial value, which has prompted active genomic research aimed at more efficient selection. Here we present the sequence and annotation of the turbot genome, which represents a milestone for both boosting breeding programmes and ascertaining the origin and diversification of flatfish. We compare the turbot genome with model fish genomes to investigate teleost chromosome evolution. We observe a conserved macrosyntenic pattern within Percomorpha and identify large syntenic blocks within the turbot genome related to the teleost genome duplication. We identify gene family expansions and positive selection of genes associated with vision and metabolism of membrane lipids, which suggests adaptation to demersal lifestyle and to cold temperatures, respectively. Our data indicate a quick evolution and diversification of flatfish to adapt to benthic life and provide clues for understanding their controversial origin. Moreover, we investigate the genomic architecture of growth, sex determination and disease resistance, key traits for understanding local adaptation and boosting turbot production, by mapping candidate genes and previously reported quantitative trait loci. The genomic architecture of these productive traits has allowed the identification of candidate genes and enriched pathways that may represent useful information for future marker-assisted selection in turbot. ; This work was funded by the Spanish Government: projects Consolider Ingenio: Aquagenomics (CSD2007-00002) and Metagenoma de la Península Ibérica (CSD2007-00005), Ministerio de Economía y Competitividad and European Regional Development Funds (AGL2012-35904), and Ministerio de Economía y Competitividad (AGL2014-51773 and AGL2014-57065-R); and Local Government Xunta de Galicia (GRC2014/010). P.P. and D.R. gratefully acknowledge the Spanish Ministerio de Educación for their FPU fellowships (AP2010-2408, AP2012-0254). Funding to pay the Open Access publication charges for this article was provided by the Ministerio de Economía y Competitividad (AGL2014-51773) and Xunta de Galicia (GRC2014/010).

A Atenção Primária à Saúde é a porta de entrada no sistema de saúde, devendo todo paciente, antes de passar por um médico especialista, ser atendido por um médico generalista. Mesmo existindo instrumentos específicos para o encaminhamento dos casos da atenção primária para o serviço especializado, ainda existem muitas dificuldades de comunicação entre os serviços que compõem as Redes de Atenção à Saúde, proporcionando prejuízos na assistência, dificuldades na continuidade do cuidado e causando a fragmentação do cuidado. O objetivo do estudo foi analisar o preenchimento do instrumento de encaminhamento entre a atenção primária e a atenção terciária de saúde, visando entender as falhas de comunicação entre a atenção primária e o serviço especializado dentro da rede de saúde. Este é um estudo retrospectivo de abordagem quali-quantitativo utilizando a análise documental de prontuários dos pacientes encaminhados da Atenção Primária de Saúde para o serviço terciário de cirurgia geral, realizado no município de Parnaíba Piauí (PI). Sendo observado que a maior parte dos campos das fichas ou prontuários foram deixados em branco ou preenchidos de forma ilegível, o que pode acarretar dificuldades no agendamento e comparecimento das consultas e/ou procedimentos, dificultando a comunicação entre os níveis de atenção à saúde.
Palavras-chave: Atenção Primária à Saúde. Atenção Terciária à Saúde. Continuidade da Assistência ao paciente. Referência e Consulta. Sistema Único de Saúde.

Abstract
Primary Health Care is the gateway to the health system, and every patient must see a generalist before seeing a specialist doctor. Even though there are specific instruments for forwarding cases from primary care to specialized services, there are still many communication difficulties between the services that make up the Health Care Networks, leading to losses in care, difficulties in continuity of care and causing care fragmentation. The objective of the study was to analyze the completion of the referral instrument between primary care and tertiary health care, aiming to understand communication gaps between primary care and specialized services within the health network. This is a retrospective study with a qualitative and quantitative approach using documentary analysis of patients' medical records referred from primary health care to the tertiary general surgery service, carried out in the city of Parnaíba Piauí (PI). It was observed that most of the fields in the forms or medical records were left blank or filled in illegibly, which could lead to difficulties in scheduling and attending appointments and/or procedures, making communication between levels of health care difficult.
Keywords: Primary Health Center. Tertiary Healthcare. Continuity of Patient Care. Referral and Consultation. Unfied Health System.

Peptidoglycan (PG) is a major component of the bacterial cell wall, forming a mesh-like structure enwrapping the bacteria that is essential for maintaining structural integrity and providing support for anchoring other components of the cell envelope. PG biogenesis is highly dynamic and requires multiple enzymes, including several hydrolases that cleave glycosidic or amide bonds in the PG. This work describes the structural and functional characterization of an NlpC/P60-contain-ing peptidase from Photobacterium damselae subsp. piscicida (Phdp), a Gram-negative bacterium that causes high mortality of warm-water marine fish with great impact for the aquaculture industry. PnpA (Photobacterium NlpC-like protein A) has a four-domain structure with a hydrophobic and narrow access to the catalytic center and specificity for the γ-D-glutamyl-meso-diaminopimelic acid bond. However, PnpA does not cleave the PG of Phdp or PG of several Gram-negative and Gram-positive bacterial species. Interestingly, it is secreted by the Phdp type II secretion system and degrades the PG of Vibrio anguillarum and Vibrio vulnificus. This suggests that PnpA is used by Phdp to gain an advantage over bacteria that compete for the same resources or to obtain nutrients in nutrient-scarce environments. Comparison of the muropeptide composition of PG susceptible and resistant to the catalytic activity of PnpA showed that the global content of muropeptides is similar, suggesting that susceptibility to PnpA is determined by the three-dimensional organization of the muropeptides in the PG. IMPORTANCE Peptidoglycan (PG) is a major component of the bacterial cell wall formed by long chains of two alternating sugars interconnected by short peptides, generating a mesh-like structure that enwraps the bacterial cell. Although PG provides structural integrity and support for anchoring other components of the cell envelope, it is constantly being remodeled through the action of specific enzymes that cleave or join its components. Here, it is shown that Photobacterium damselae subsp. piscicida, a bacterium that causes high mortality in warm-water marine fish, produces PnpA, an enzyme that is secreted into the environment and is able to cleave the PG of potentially competing bacteria, either to gain a competitive advantage and/or to obtain nutrients. The specificity of PnpA for the PG of some bacteria and its inability to cleave others may be explained by differences in the structure of the PG mesh and not by different muropeptide composition. ; Europeu de Desenvolvimento Regional (FEDER) funds through the COMPETE 2020 Operacional Program for Competitiveness and Internationalization (POCI), Portugal 2020, and by Portuguese funds through Fundação para a Ciência e a Tecnologia/Ministério da Ciência, Tecnologia e Ensino Superior and Fundação para a Ciência e a Tecnologia (FCT), I.P., within the scope of the Norma Transitória - DL57/2016/CP1355/CT0010. This work had also support from the State Agency for Research (AEI) of Spain cofunded by the FEDER Program from the European Union (grants AGL2016-79738-R and BIO2016-77639-P)

This study aimed to evaluate the interception of light (%IL), leaf area index (LAI), and the chemical and productive characteristics of elephant grass (Pennisetum purpureum Schum) under different defoliation frequencies (30, 45, 60, 75, and 90 days after cutting). The experimental design was completely randomized with five replications and five treatments (cutting frequencies). The chemical composition was analyzed in a factorial arrangement 2 ×5 (two fractions: leaf and stem, and five defoliation frequencies). The pattern of variation in IL and LAI in function of the frequency of cutting was ascending order. The maximum values of %IL and LAI occurred at 75 and 90 days after cutting with 98.46%; 98.72% (%IL) and 7.08; 8.10 (LAI), respectively. There was no effect of cutting frequency on the total yield of forage, leaf production, generation of stem and dead material, tillers alive, dead tillers and height. Only the leaf/stem ratio was not influenced (P > 0.05) among the factors studied. The frequency of cutting influenced (P < 0.05) the chemical composition, where decreased cutting frequency significantly increased the levels of dry matter, neutral detergent fiber, acid detergent fiber, cellulose, and ash in two fractions evaluated (leaf and stem); the crude protein content showed a decline from the moment the frequency of cutting was increased. The LAI, and productive and chemical characteristics of elephant grass were influenced by increased frequency of cutting. Limiting the cutting of the grass to 60 days implies an optimal point of production and quality.

Quality control (QC) of medical imaging devices is essential to ensure their proper function and to gain accurate and quantitative results. Therefore, several international bodies have published QC guidelines and recommendations for a wide range of imaging modalities to ensure adequate performance of the systems. Hybrid imaging systems such as positron emission tomography/computed tomography (PET/CT) or PET/magnetic resonance imaging (PET/MRI), in particular, present additional challenges caused by differences between the combined modalities. However, despite the increasing use of this hybrid imaging modality in recent years, there are no dedicated QC recommendations for PET/MRI. Therefore, this work aims at collecting information on QC procedures across a European PET/MRI network, presenting quality assurance procedures implemented by PET/MRI vendors and achieving a consensus on PET/MRI QC procedures across imaging centers. Users of PET/MRI systems at partner sites involved in the HYBRID consortium were surveyed about local frequencies of QC procedures for PET/MRI. Although all sites indicated that they perform vendor-specific daily QC procedures, significant variations across the centers were observed for other QC tests and testing frequencies. Likewise, variations in available recommendations and guidelines and the QC procedures implemented by vendors were found. Based on the available information and our clinical expertise within this consortium, we were able to propose a minimum set of PET/MRI QC recommendations including the daily QC, cross-calibration tests, and an image quality (IQ) assessment for PET and coil checks and MR image quality tests for MRI. Together with regular checks of the PET–MRI alignment, proper PET/MRI performance can be ensured. ; This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 764458. The work reflects only the author's view, and the Agency is not responsible for any use ...

Following a brief historical summary of the way in which electron beam lithography developed out of the scanning electron microscope, three state-of-the-art charged-particle beam nanopatterning technologies are considered. All three have been the subject of a recently completed European Union Project entitled "Single Nanometre Manufacturing: Beyond CMOS". Scanning helium ion beam lithography has the advantages of virtually zero proximity effect, nanoscale patterning capability and high sensitivity in combination with a novel fullerene resist based on the sub-nanometre C60 molecule. The shot noise-limited minimum linewidth achieved to date is 6 nm. The second technology, focused electron induced processing (FEBIP), uses a nozzle-dispensed precursor gas either to etch or to deposit patterns on the nanometre scale without the need for resist. The process has potential for high throughput enhancement using multiple electron beams and a system employing up to 196 beams is under development based on a commercial SEM platform. Among its potential applications is the manufacture of templates for nanoimprint lithography, NIL. This is also a target application for the third and final charged particle technology, viz. field emission electron scanning probe lithography, FE-eSPL. This has been developed out of scanning tunneling microscopy using lower-energy electrons (tens of electronvolts rather than the tens of kiloelectronvolts of the other techniques). It has the considerable advantage of being employed without the need for a vacuum system, in ambient air and is capable of sub-10 nm patterning using either developable resists or a self-developing mode applicable for many polymeric resists, which is preferred. Like FEBIP it is potentially capable of massive parallelization for applications requiring high throughput.

Following a brief historical summary of the way in which electron beam lithography developed out of the scanning electron microscope, three state-of-the-art charged-particle beam nanopatterning technologies are considered. All three have been the subject of a recently completed European Union Project entitled "Single Nanometre Manufacturing: Beyond CMOS". Scanning helium ion beam lithography has the advantages of virtually zero proximity effect, nanoscale patterning capability and high sensitivity in combination with a novel fullerene resist based on the sub-nanometre C60 molecule. The shot noise-limited minimum linewidth achieved to date is 6 nm. The second technology, focused electron induced processing (FEBIP), uses a nozzle-dispensed precursor gas either to etch or to deposit patterns on the nanometre scale without the need for resist. The process has potential for high throughput enhancement using multiple electron beams and a system employing up to 196 beams is under development based on a commercial SEM platform. Among its potential applications is the manufacture of templates for nanoimprint lithography, NIL. This is also a target application for the third and final charged particle technology, viz. field emission electron scanning probe lithography, FE-eSPL. This has been developed out of scanning tunneling microscopy using lower-energy electrons (tens of electronvolts rather than the tens of kiloelectronvolts of the other techniques). It has the considerable advantage of being employed without the need for a vacuum system, in ambient air and is capable of sub-10 nm patterning using either developable resists or a self-developing mode applicable for many polymeric resists, which is preferred. Like FEBIP it is potentially capable of massive parallelization for applications requiring high throughput.

Com essa temática da pesquisa espera-se alcansar uma melhor compreensão da distribuição territorial com base nos direitos culturais das comunidades residentes da Reserva Extrativista (RESEX) de Acaú-Goiana, no nordeste brasileiro, caracterizando a área nas abordagens histórico-geográfico e cultural. Além de entender a visão que os próprios residentes das comunidades apresentam sobre espaço, território e uso dos recursos naturais. Onde esses atributos irão contribuir para desenvolver uma ideia que busque melhorar o compartilhamento das áreas da RESEX, em que a própria comunidade seja atuante na construção dessas ideias. Tentando dessa forma, amenizar os conflitos socioambientais existentes na área.